Filter
Top Products
Troubleshooting
28
Troubleshooting
This section describes problems you may encounter when using
the compact disc player, and includes suggested solutions.
If these suggestions fail to cure the problem, please contact
your Meridian dealer for further assistance.
No lights are displayed when
switching on
❍ Check that your AC power supply is connected correctly.
❍ Check that the ON OFF switch on the back panel
is in the ON position.
❍ Check that the fuse on the compact disc player
back panel and the fuse in the unit’s power plug
have not blown; see To change the mains fuse, page 30.
The tray will not open
❍ Check that the standby display is shown.
If the standby display is shown:
❍ Switch off the compact disc player and disconnect it from the
AC power supply.
❍ Restore power to the compact disc player.
❍ Try again to open the disc tray.
There is no sound when playing a disc
❍ Check that your preamplifier is switched on, and the volume is
at an appropriate level.
❍ Check that the compact disc player is connected correctly to
the other components of your system; see Connecting the
compact disc player, page 18.
❍ Check that the correct source has been selected on your
preamplifier.
❍ Try playing another disc. If this disc works, check the problem
disc for signs of dirt or damage.