Filter
Top Products
Configuring the compact disc player
24
Choosing standard settings
The compact disc player provides two standard settings, called
Types, which configure the 507 into the most commonly needed
configurations.
Choosing a Type overrides any other configuration you may
have performed, and so can be used to reset the configuration
of the unit.
Type 1 is the recommended Type. Type 2 is provided for
compatibility with Meridian 600 or 200 Series units.
To restore the standard settings
● Switch off the compact disc player, using the power switch on
the back panel.
● Switch on the power again while holding down Off (front
panel).
After a short delay the display
will show:
Type 1
● Press [ or ] (front panel) to select between Type 1 and Type
2.
For example, to reset to Type 1
the display shows:
Type 1
● Switch the power off and then on again, using the power
switch on the back panel, to use the 507 with the standard
configuration.