Mark Levinson 500H Stereo Amplifier User Manual


 
25
Nº500H Series Power Amplifier
Nº535H Specifications
All specifications are subject to change without notice.
Input & Output Connectors •vebalancedXLRinputsperchannel
•veunbalancedRCAinputsperchannel
•vepairsloudspeakeroutputswithbanana-plugsockets
per channel (banana-plug socket not available on the
230VACmodels)
Control Connectors •oneEthernet10Base-Tport
•one3.5mmmono(tip/sleeve)miniplugtriggerinput,3-12Vdc
•one3.5mmmono(tip/sleeve)miniplugtriggeroutput,3-12Vdc
•3-pinIECstandardpowerconnector
Rated Output Power 20Hz to 20kHz at <0.5% THD, 200W per channel @ 8 Ω, full
outputfrom1.84Vrms
Frequency Response within 0.5dB from 10Hz to 20kHz
Signal-to-Noise Ratio >85dB,referencelevel:2.83Vrms
Input Impedance 60 kΩ (balanced); 30 kΩ (unbalanced)
Voltage Gain 26.8dB
Input Sensitivity 2.83Vrmsoutputat130mVrmsinput
Power Requirements 100V~,120V~,230V~,1000W,factorysetfordestinationcountry
Dimensions* •Height(withfeet):7.65"(19.4cm)
•Height(withoutfeet):6.97"(17.7cm)
•Width:17.75"(45.1cm)
•Depth:19.83"(50.4cm)
*See dimensions diagram on the next page.
Weight •Netweight:98.5lbs(44.7kg)
•Shippingweight:108.5lbs(49.2kg)
Operating Environment •Operatingtemperature:0ºto35ºC(32ºto95ºF)
•Storagetemperature:–30ºto75ºC(–22ºto167ºF)
•Relativehumidity:95%maximumwithoutcondensation