Filter
Top Products
44
ENGLISH
SORTING PRESET STATIONS
Stored preset stations number can be kept line.
To sort the numbers, press and hold the MEMO and the F/P buttons.
“PRESET SORT” will appear on the display and sorting will be done.
NAME INPUT OF THE PRESET STATION.
This function allows the name of each preset channel to be entered
using alphanumeric characters.
Before name inputting, need to store preset stations with the preset
memory operation.
1.
Recall the preset number to be inputted name with the method
described in “Recalling” a preset station.
2.
Press the MEMO button on the front panel or touch Memo on the
remote for more than 3 seconds.
3.
The left most column of the station name indicator flashes,
indicating the character entry ready status.
4.
When the SELECT knob is turned or press Up / Down button on
the remote alphabetic and numeric characters will be displayed in
the following order:
A 'B 'C ...Z '1 '2 '3..... 0 '– '+ '/ '(Blank) 'A UP ' _DOWN
To fill blank, press CLEAR button or tap CLR on the remote.
5.
After selecting the first character to be entered, press the MEMO
or ENTER buttons, press OK button on the remote.
The entry in this column is fixed and the next column starts to
flash. Fill the next column same as.
To move back and forth between the characters, press the
TUNING UP / DOWN button or press Left / Right buttons on the
remote.
Note:
Unused columns should be filled by entering blanks.
6.
To save name, press the MEMO or ENTER button, press OK
button on the remote for more than 2 seconds.
2.5.6.5.6. 4.4.
H
Ex
M
S
VOL
CH
OK
5.6.
4.
4.
2.5 .
4.