Filter
Top Products
27
ENGLISH
SETUP
After all components are connected, initial setup must be performed.
ON SCREEN DISPLAY MENU SYSTEM
The SR8200 incorporates an on-screen menu system, which makes
various operations possible by using the cursor (Up, Down, Left,
Right) and OK buttons on the remote control unit.
Notes:
• To view the on-screen displays, make certain you have made a
connection from the Monitor Out jack (VIDEO, S-VIDEO or
COMPONENT)on the rear panel to the composite,S-Video or
component input of your TV or projector. (see 23 page)
• In order to view the SR8200’s displays, the correct video source
must be selected on the video display.
MA I N SETUP MENU
1 ) I NPUT SETUP :UNLOCKED
2 )SPEAKER SETUP:UNLOCKED
3 )PREFERENCE :UNLOCKED
4 )SURROUND :UNLOCKED
5 )PRO LOGIC 2 :UNLOCKED
6 )MULT I ROOM :UNLOCKED
7 ) 7 . 1 CH IN :UNLOCKED
8 )DC-TRIG SETUP:UNLOCKED
EXI T
1INPUTSETUP
CD :D6-AT TV :ANA
TAPE :ANA DSS :D3-AT
CD-R :D1-AT DVD :D5 -AT
VCR1 :ANA
VCR2 :ANA
AUX1 :D -AT
MA I N EX I T
2-1 SPEAKERS SIZE
THX SPKR SYSTEM : YES
SUBWOOFER : YES
FRONT L/R : SMALL
CENTER : SMALL
SURROUND L / R : SMALL
SURR. BACK : 1CH
SURR. BACK S I ZE : SMALL
MA I N NEXT EX I T
2 - 2 SPEAKERS DI STANCE
FRONT L : 10 f t 3.0 m
FRONT R : 10 f t 3.0 m
CENTER : 10 f t 3 . 0 m
SURR. L : 10 f t 3 . 0 m
SURR. R : 10 f t 3 . 0 m
SUB W : 10 f t 3. 0 m
SURR. BACK: 10 f t 3 . 0 m
MAIN RETURN NEXT EX I T
2- 3 SPEAKERS LEVEL
TEST MODE : MANUAL
FRONT L : 0 dB
CENTER : 0 dB
FRONT R : 0 dB
SURR. R : 0 dB
SURR. BACK : 0 dB
SURR. L : 0 dB
SUB W : 0 dB
MAIN RETURN NEXT EX I T
3 PREFERENCE
TV-AUTO : DI SABLE
OSD INFO : ENABLE
D IGI TAL OUT : SOURCE
SUBWOOFER OUT : THX
MA I N EX I T
4 SURROUND
SURR.MODE : AUTO
C INEMA RE-EQ : OFF
LFE LEVEL : 0 dB
SURR L /R EFFECT : ∗∗∗dB
SURR BACK EFFECT : ∗∗∗dB
CENTER EFFECT : ∗∗∗dB
SUB W EFFECT : ∗∗∗dB
MA I N EX I T
6MULTIROOM
MULT I ROOM : OFF
MULT I SPKR : OFF
V IDEO : DVD
AUDIO : DVD
VOLUME SETUP : VARIABLE
VOLUME LEVEL : - 90 dB
SLEEP T IMER : OFF
- ---MAIN-ROOM STATUS----
V IDEO:DVD AUDIO:DVD
MA I N EX I T
5 PL2 -MUS I C PARAMETER
PARAMETER : DEFAULT
PANORAMA : OFF
DIMENSION : 4
CENTER WIDTH : 0
MA I N EX I T
8-2 DC TRIGGER SETUP
DC TRIG- 2 : DI SABLE
CD : OFF TV : OFF
TAPE : OFF DSS : OFF
CD-R : OFF DVD : OFF
TUNER: OFF VCR1 : OFF
AUX1 : OFF VCR2 : OFF
AUX2 : OFF
MA I N RETURN EX I T
8-1 DC TRIGGER SETUP
DC TRIG- 1 : DI SABLE
CD : OFF TV : OFF
TAPE : OFF DSS : OFF
CD-R : OFF DVD : OFF
TUNER: OFF VCR1 : OFF
AUX1 : OFF VCR2 : OFF
AUX2 : OFF
MAIN NEXT EXIT
7 7 . 1 CH INPUT LEVEL
FRONT L : 0 dB
CENTER : 0 dB
FRONT R : 0 dB
SURR. R : 0 dB
SURR. B R : 0 dB
SURR. B L : 0 dB
SURR. L : 0 dB
SUB W : 0 dB
MA I N EX I T
1.
Select the AMP mode in remote commander.
2.
Press M(menu) button on the remote commander to display the
“MAIN SETUP MENU” of the OSD menu system. There are 8
items in the MAIN SETUP MENU.
3.
Select a desired sub-menu with Up or Down cursor button, and
press the OK button to entry.
The display will change to selected sub-menu.
You can lock the condition of setup to each sub-menu with Left or
Right cursor buttons.
Notes: If you desire to adjust any sub-menu, you need to set
UNLOCKED.
4.
If you desire to exit from this menu system, press Ex(exit) button
or move the cursor to EXIT and press the OK button.
2 -4 BASS PEAK LEVEL
BASS PEAK TEST : START
VOLUME LEVEL : +18dB
--------------------
ENTER
MA I N RETURN EX I T