Filter
Top Products
19
ENGLISH
GENERAL MALFUNCTION
If the equipment malfunctions, this may be because an electrostatic
discharge or AC line interference has corrupted the information in the
equipment memory circuits. Therefore:
- disconnect the plug from the AC line supply
- after waiting at least three minutes, reconnect the plug to the AC
line supply
- re-attempt to operate the equipment
HOW TO RESET THE UNIT
Should the operation or display seem to be abnormal, reset the unit
with the following procedure.
Press POWER button x to set SR4200 in standby mode, then press
and hold the F/P !4 until SR4200 is turned on.
Remember that the procedure will reset the settings of the function
selector, Surround mode, delay time, TUNER PRESET etc., to their
initial settings.
Memory backup
• In case a power outage occurs or the power cord is
accidentally unplugged, the SR4200 is equipped with a backup
function to prevent memory data such as the preset memory
from being erased.
The memory functions are backed up for up to about one
week.
NOTE:
First of all keep SR4200 Standby or Powered-on more than 6
hours, to sufficient time for memory back up.