Filter
Top Products
4
ENGLISH
FRONT PANEL FEATURES (SEE
PAGE iii.)
q POWER switch and STANDBY indicator
Press the button to turn the power ON, and press again to turn it OFF.
If the POWER switch is in the ON position, the power of this unit can
be turned ON/OFF by pressing the POWER button on the remote
control unit.
When this unit is in the standby mode with the POWER switch set to
the ON position, pressing one of the FUNCTION SELECTOR buttons
also allows to turn the power on.
The STANDBY indicator lights up when this unit is the standby mode
(power OFF) by the remote control unit.
w PHONES jack for stereo headphones
Conventional dynamic headphones can be plugged in here.
Notes:
When using headphones, the surround mode is switched automati-
cally to STEREO and the sound from the speakers is muted.
The surround mode returns to the previous setting as soon as the
plug is removed from the jack.
e SURROUND MODE Selector knob
When this knob is turned, the surround mode is switched in the
following sequence.
Note:
Not all modes will be present if an analog input is selected.
r VOLUME control knob
Adjusts the overall sound level. Turning the control clockwise
increases the sound level.
t FUNCTION SELECTOR buttons (AUDIO/
VIDEO)
These buttons are used to select the sources.
The video function selector, such as TV , DVD , VCR1 and DSS/
VCR2, selects video and audio simultaneously.
y A/D (Analog/Digital) SELECTOR button
This is used to select between the analog and/or digital inputs.
When analog input is selected, “ANALOG” will be shown in the
display.
Note:
This button is not used for an input source that is not connected to
a digital input.
u S. ( Source) DIRECT button
When this button is pressed, the tone control circuit is bypassed as
well as Bass Management.
Notes:
The surround mode is automatically switched to AUTO when the
source direct function is turned on.
Additionally, Speaker Configurations are fixed automatically as follow.
Front speaker = Large
Center speaker = Large
Surround speaker = Large
Sub woofer = Yes
i SLEEP button
Set the sleep timer function with this button .
o DIMMER (Display off) button
When this button is pressed once, the display is dimmed.
When this button is pressed twice, the display is turned off and the
“DISPLAY OFF” indicator lights up.
Press this button again to turn the display ON again.
!0 MUTE button
Press this button to mute the output to the speakers. Press it again to
return to the previous volume level.
!1 CLEAR button
Press this button to cancel the station memory setting mode or preset
scan tuning.
!2 MEMORY button
Press this button to enter the tuner preset memory numbers and
station names.
!3 TUNING / PRESET UP and DOWN buttons
During reception of AM (MW/LW) or FM, you can scan the other
frequencies or select another preset station pressing these buttons.
!4 FREQUENCY / PRESET button
During reception of AM (MW/LW) or FM, you can change the function
of the UP/DOWN buttons for scanning frequencies or selecting preset
stations by pressing this button.
!5 MODE button
Press this button to select the auto stereo mode or mono mode when
the FM band is selected. The M indicator lights in the auto stereo
mode.
!6 INFRARED SENSOR window
This window receives infrared signals from the remote control unit.
AUTO
DTS
DOLBY
PROLOGIC
DOLBY PLII
MOVIE
5 STEREO
MOVIE
MATRIX
STEREO
HALLGAME
DOLBY PLII
MUSIC
VIRTUAL