Filter
Top Products
22
ENGLISH
The section describes the care and
maintenance tasks that must be performed
to optimize the operation of your Marantz
component.
7 Cleaning of equipment external
surfaces
The exterior finish of your unit will last
indefinitely with proper care and cleaning,
Never use scouring pads, steel wool, scourging
powders or harsh chemical agents (e.g., lye
solution), alcohol, thinner, benzine, insecticide
or other volatile substances as these wil mar
the finish of the equipment. Likewise, never
use cloths containing chemical substances.
If the equipment get dirty, wipe the external
surfaces with a soft, lint-free cloth.
If the equipment becomes heavily soiled:
• dilute some washing up liquid in water, in
a ratio of one part detergent to six parts
water.
• dip a soft, lint free in the solution and wring
the it is damp.
• wipe the equipment with the damp cloth.
• dry the equipment by wiping it with a dry
cloth.
OTHERS
7 Repairs
Only the most competent and qualified
service technicians should be allowed to
service the factory-trained warranty station
personnel have the knowledge and special
facilities needed for repair and calibration of
this precision equipment. After the warranty
period has expired, repairs will be performed
for a charge if the equipment can be returned
to normal operation.
In the event of difficulty, refer to your dealer or
write directly to the nearest location to you that
is listed on the Marantz Authorized Service
Station list. If writing, please include the model
and serial number of the equipment together
with a full description of what you think is
abnormal about the equipment’s behaviour.
SPECIFICATIONS
¶
Audio power amplifier
Rated power output (20 Hz-20 kHz / THD = 0.05%)
.........................................26 W/ch 6Ω
Maximum power output (1 kHz/JEITA)
.........................................30 W/ch 6Ω
Frequency characteristics
Analog input: ANALOG IN 1
........................20 Hz-20 kHz (± 3 dB)
Digital input: PCM 44.1 kHz
........................20 Hz-20 kHz (± 3 dB)
S/N ratio: PCM 44.1 kHz
................................................ 100 dB
¶
Decoding
Compatible playback signal formats
PCM audio (fs = 32 kHz, 44.1 kHz, 48 kHz)
DOLBY DIGITAL
dts
AAC
Binaural
¶
Power supply
Power requirements ............. AC 120 V, 60 Hz
Power consumption ............................... 40 W
............ 125 W (6Ω, 30 W x 2 outputs)
Power consumption in standby mode ... 0.8 W
¶
Input
OPT IN (optical digital) ......................3 inputs
HDMI IN (Version 1.1) ......................2 inputs
ANALOG IN ......................... 2 inputs (stereo)
¶
Output
HDMI OUT (Version 1.1) .................. 1 output
SUB W. PREOUT ............................. 1 output
REMOTE OUT .................................. 1 output
¶
Speakers
Tweeter ............1.9 cm (3/4 inches) dome x 2
Midrange ............8 cm (3 1⁄4 inches) cone x 2
Woofer .............12 cm (4 3⁄4 inches) cone x 2
¶
Dimensions (unit)
Width .................1,080 mm (42 9/16 inches)
Height ......................153 mm (6 1/16 inches)
Depth ....................144 mm (5 11/16 inches)
Mass (unit) ..........................12 kg (26 lb 7 oz)
¶
Supplied accessories
Remote controller ........................................ 1
AAA batteries .............................................. 2
User Guide (this manual) ............................. 1
Note:
The speaker nets cannot be removed.
1080
153
144
2
Specifications subject to change without prior notice.