Filter
Top Products
19
ENGLISH
SETTINGS
SETTING THE BINAURAL
MODE
• Press the MODE button on the remote
controller to listen to the audio source
recorded in binaural mode.
• The MODE indicator lights in blue and the
stereophonic effect of the sound source is
reproduced especially realistically.
Note:
The binaural mode is automatically
canceled when a sound source other than
2-channel PCM sound or analog sound is
input.
MODE
button
Lights
SETTING THE DOLBY
PRO LOGIC
II MODE
• This item is used to select the sound field
environment produced by Dolby Pro Logic
II .
• When the unit is set to “PL
II MOVIE” or “PL
II MUSIC,” the Dolby PL II indicator lights.
•
Each time you press the Dolby PL
II
button
on the remote controller, the sound field
setting changes as follows:
PL
II
MOVIE
OFF
PL
II
MUSIC
Dolby PL II
button
Lights
¶
When “PL II MOVIE” is selected
Stereophonic effect is obtained from the
soundtrack of a stereo movie encoded by
Dolby Surround.
¶
When “PL II MUSIC” is selected
Stereophonic effect is obtained from a
conventional stereo source such as a CD
player, iPod, etc.
¶
When “OFF” is selected
The Dolby Pro Logic II mode is turned off.
If the signal source is input from the ANALOG
IN 1 (VCR) or 2 (AUX) jacks, or 2-channel
digital signal is input when the Dolby Pro
Logic
II mode is set to “PL II MOVIE” or “PL II
MUSIC,” the setting is automatically switched
to “PL
II MOVIE” and the Dolby PL II indicator
lights.
Notes:
• To change the setting, press the Dolby PL II
button repeatedly.
• The selected setting of Dolby Pro Logic
II
mode is saved in the unit.