Filter
Top Products
16
ENGLISH
PROGRAMMING
Clearing a program
11
11
1
Press
99
99
9 (13, 81) if necessary to stop programmed play.
22
22
2
Press
99
99
9 (13, 81) again to clear the program.
➔ PROGRAM disappears from the display.
• The program is also cleared if you open the disc tray.
Erasing a track from a program
11
11
1
In Stop mode press
PROG
(11, 85) to enter Program
mode.
22
22
2
Use
QQ
QQ
Q (17, 75) or
RR
RR
R (18, 80) to select the track from
which to delete.
➔ The track number and program step will be shown on
the display.
33
33
3
Press
DELETE/CANCEL
(23, 79)
to erase the track from
the program.
➔ The remaining program steps and the remaining playing
time of the program will be displayed.
Programmed play
• You can program up to 99 tracks to play in any desired se-
quence.
• Tracks can be programmed more than once, but each time
counts as a track. (step)
Programming for playback
11
11
1
Press
PROG
(11, 85) on the remote control to enter Pro-
gram mode.
➔
PROGRAM flashes and appears on the display.
22
22
2
Select the required track numbers by turning the
REC
LEVEL/SELECT
(19) key left or right and store by pressing
PUSH ENTER
(19).
or:
Key in a track number with the
NUMBER
(9, 70). For 2-
digit numbers, press the keys in rapid succession and store
by pressing PUSH/ENTER (19) on ENTER (78).
➔ The track will be stored in the program.
➔ The track number, total program time and the number of
programmed tracks (steps) are displayed.
33
33
3
Repeat step
22
22
2 for all tracks to be programmed.
44
44
4
Press
99
99
9 (13, 81) or
PROG
(11, 85) to end programming.
➔ PROGRAM lights continuously.
55
55
5
Press
22
22
2/
;;
;;
; (14) or
2 2
2 2
2 (73) to start programmed play.
The numbers between parentheses refer to the fold-out.