Filter
Top Products
10
ENGLISH
RECORDING
55
55
5
To start recording, press
PLAY
on the selected source.
➔ The CD-Recorder automatically starts to record. The re-
cording time left appears on the display.
• If, however, you start the source during a track, CD-
SYNC recording starts at the beginning of the next track
or after 2.7 seconds of silence in analog recordings.
• To check the elapsed recording time, press
TIME
(7) or
DISPLAY
(71). (This can also be done during recording)
• The recorder stops automatically.
66
66
6
To stop recording manually, press
99
99
9 (13, 81).
• If 9 (13, 81) was pressed within 3 seconds after pressing
PLAY
on the selected source, no recording will take
place.
• To interrupt recording, press 2/;
(14) or ; (76).
To resume, press 0 (12) on the CD-Recorder.
After recording the display will show
for sev-
eral seconds.
Note:
- Recordings from DAT, DCC or analog sources will only stop
after 20 seconds silence.
- MAKE CD is a recording mode for auto finalized after syn-
chronized recording. It takes about 1 minute to start auto fi-
nalizing after finish recording the last track. (WAIT appears
on the display.)
- The recorded sound might be distorted when you adjust the
recording level to set above 0dB for digital recording and -
12dB for analog recording. The default setting of recvolume
for digital is 0dB and analog is -12dB when this CD-Recorder
is shipped.
Important:
If you want to play the recorded CD-R disc on any regular
CD player, it must first be finalized. See finalizing discs.
Finalized CD-RW discs play only on CD-RW compatible CD
players.
CD-SYNC
The CD-SYNC feature enables you to make fast and easy re-
cordings of a CD. Track increments are automatically detected
from the source material. Track increments cannot be added
manually. In analog source material a silence of 2.7 seconds or
more is automatically detected as a track increment.
11
11
1
Make sure the disc is absolutely free of scratches and
dust particles.
22
22
2
Connect the cable from an external CD player to the CD-
Recorder. (see INSTALLATION from page 5 to 7.)
33
33
3
Press
INPUT
(10) repeatedly until the selected source,
appears on the display (depending on the digital connec-
tion used):
➔ , or lights up and ,
or appears on the display.
44
44
4 With the CD-Recorder stopped, press
REC MODE
(26).
once: to select ‘
’
twice: to select ‘
’
four times: to select ‘
’ (When ANALOG was se-
lected, this menu dose not appear on the dis-
play.
➔
and start to flash.
• If or flashes, the digital connection is incor-
rect.
Note:
You can adjust the recording level by rotating the
REC LEVEL/
SELECT
(19).
DIGITAL RECORDING : +6dB ~ –63dB
ANALOG RECORDING : 0dB ~ –63dB
CD RECORDER CDR631
POWER
IR
STANDBY
Recordable
ReWritable
HEADPHONE LEVEL
010
MENU
DELETE
CANCL
TR.INCR.
REPEATRANDOM
ERASE
TEXT
0
5
9
8
7
4
3
6
12
TIME
REC MODE
STORE
FINAL
REC LEVEL/SELECT
PUSH ENTER
PROG
INPUT
MENU/
STORE
CANCEL/
DELETE
0
987
654
321
CD
CDR
ABC DEF GHI
JKL MN OPQ
RST UVW XYZ
DISPLAY
SPACE
SCROLL
FUNCTION
ENTER
er y
y
The numbers between parentheses refer to the fold-out.