Filter
Top Products
8
ENGLISH
USING THE RECORDER
Inserting discs
1 Press
//
//
/ (6) to open the disc tray.
➔ lights up.
2 Insert a CD, CD-R or CD-RW in the appropriate recess in
the tray, label side up.
3 Press
//
//
/ (6) to close the tray.
➔ lights up, followed by and the dis-
play will show the type of disc you inserted.
• If a CD-R(W) is finalized it will show CD on the display.
• If CD-text is available the TITLE/ARTIST will scroll by.
Note:
- For recording it is important that the blank disc is completely
free from dust particles or scratches. (see Compact Discs
page 2).
- If you insert a blank or partly-recorded CD-R(W) or
unfinalized CD-R(W), the CD-Recorder will calibrate the disc
for optimum recording. During this process the display will
first show
and then the number of audio
tracks. Calibration can take up to 30 seconds.
-
Switching ON and OFF
1 Plug the power cord supplied into the MAINS connector
on the CD-Recorder, then into a mains socket.
MADE IN JAPAN
MODEL NO.CDR631
OUT
IN
AC IN
q
2 Press the
POWER
(1) button on the front of the CD-Re-
corder to turn it on or off.
CD RECORDER CDR631
POWER
IR
STANDBY
Recordable
ReWritable
HEADPHONE LEVEL
010
w
Using the remote control
1 Open the battery compartment cover.
2 Insert 2 batteries (AA, LR-6 or UM-3; as supplied) as
shown.
3 Replace the cover.
Note:
- We recommend you use 2 batteries of the same type and
condition.
- Always point the remote control directly towards the re-
corder and make sure there.
This remote control can switch “STANDBY ON/OFF” but can-
not switch “POWER ON/OFF” the CD-Recorder.
Batteries contain chemical substances, so they should be
disposed of properly.
The numbers between parentheses refer to the fold-out.