Filter
Top Products
11
ENGLISH
44
44
4
With the recorder stopped, press
REC MODE
(26) three
times to enter the Manual Record standby mode.
➔ MANUAL starts to flash and the display shows
.
• If
or
flashes, the digital connection is incorrect.
55
55
5
Set the optimal recording level on the CD-Recorder.
1. Play the source first to set the optimal recording level on
the CD-Recorder.
2. Rotate the
REC LEVEL/SELCT
(19) key until, on the
Record/Play Level bar, all the blue segments are alight,
but the red segments do not light continuously during
the loudest passages.
DIGITAL RECORDING : +6dB ~ –63dB
ANALOG RECORDING: 0dB ~ –63dB
3. Stop the source.
• To record a 3-second silence at the start of a track,
press 2/; (14) or ; (76) on the CD-Recorder before
starting the source.
66
66
6
To start recording, press
00
00
0 (12) on the CD-Recorder and
immediately start the source (from Stop-mode).
The track number and recording time left appear on the display.
• If 9 (13, 81) was pressed within 3 seconds after 0
(12), no recording will take place.
• To check the elapsed recording time, press
TIME
(7)
or
DISPLAY
(71). (This can also be done during the
recording.)
77
77
7
To stop recording, press
99
99
9 (13, 81).
• To interrupt recording, press 2/;
(14) or ; (76).
After recording the display will show
for sev-
eral seconds.
Note:
The recorded sound might be distorted when you adjust the
recording level to set above 0dB for digital recording and -12dB
for analog recording. The default setting of recvolume for digital
is 0dB and analog is -12dB when this CD-Recorder is shipped.
Important:
If you want to play the recorded CD-R disc on any regular
CD player, it must first be finalized. See finalizing discs.
Finalized CD-RW discs play only on CD-RW compatible CD
players.
RECORDING
Manual start recording
About AUTO TRACK and AUTO STOP
• AUTO TRACK is a function to increment track numbers
either manually or automatically.
AUTO TRACK ON : track number will be automati-
cally incremented according to
the source. (See the table on
page 19.)
AUTO TRACK OFF:
track number can be manually
incremented by pressing
TR.
INCR.
(25) or
TRACK INCR
. (67).
• When AUTO TRACK is ON, you can also set AUTO
STOP function.
AUTO STOP ON : the recording will be stopped auto-
matically. (See the Table on page
20.)
AUTO STOP OFF: the recording has to be stopped
manually.
Note:
AUTO STOP function is only activated when Manual start re-
cording (REC MANUAL mode) is used.
11
11
1
Make sure the disc is absolutely free of scratches and
dust particles.
22
22
2
Connect the cable from an external CD player to the CD-
Recorder. (see INSTALLATION page 5 and 6.)
33
33
3
Press
INPUT
(10) repeatedly until the selected external
source appears on the display (depending on the connec-
tion used):
➔ , or lights up and ,
or appears on the display.
CD RECORDER CDR631
POWER
IR
STANDBY
Recordable
ReWritable
HEADPHONE LEVEL
010
MENU
DELETE
CANCL
TR.INCR.
REPEATRANDOM
ERASE
TEXT
0
5
9
8
7
4
3
6
12
TIME
REC MODE
STORE
FINAL
REC LEVEL/SELECT
PUSH ENTER
PROG
INPUT
MENU/
STORE
CANCEL/
DELETE
0
987
654
321
CD
CDR
ABC DEF GHI
JKL MN OPQ
RST UVW XYZ
DISPLAY
SPACE
SCROLL
FUNCTION
ENTER
er u
ty
u
The numbers between parentheses refer to the fold-out.