Filter
Top Products
24
ENGLISH
Copy protection
All pre-recorded audio CDs include a digital mark indicating the
copy protection status of the disc. This information is stored in
the user data area of the disc and is transmitted in the SPDIF
format digital output.
Since the CDR500 is a professional CD recorder, it will record
from any digital source, ignoring the copy protection setting of
the source material. Addtionally, the CDR500 allows you to set
the level of copy protection of each disc you record.
There are three settings for the copy protection on a disc:
Copy Protection OFF
This recording allows unlimted digital copying. A con-
sumer digital recording device can digitally record this
disc.
Copy Protection ON
This recording allows a single generation digital copy to
be made for personal use. A consumer digital recording
device will be able to digitally record this disc but the
copy will have Copy Protection set to HCO so that fur-
ther digital copies can not be made.
Copy Protection HCO (Home Copy protected Original)
This recording does not allow digital copying. A con-
sumer digital recording device will not be able to make
digital copies of this disc.
11
11
1
Stay in the stop mode.(No operation)
22
22
2
Press
STORE/MENU
(12, 83) to enter Menu mode.
33
33
3
Rotate
REC LEVEL/SELECT
(13) or press
SS
SS
S (80),
TT
TT
T
(88) to select the Copy submenus.
appears on the display.
44
44
4
Press
REC LEVEL/SELECT
(13) or
ENTER
(84) to confirm.
55
55
5
Select Copy , , or by rotating
REC LEVEL/
SELECT (
13) or press
SS
SS
S (80),
TT
TT
T (88).
66
66
6
Press
REC LEVEL/SELECT
(13) or
ENTER
(84) to confirm.
77
77
7
Press
STORE/MENU
(12, 83) to store setting and return
to the submenu, or press
99
99
9 (5,87) to exit.
Note:
Analog sources do not carry copy protection.
MENU MODE
The numbers between parentheses refer to the fold-out.
Balance (Only active in Record/Standby mode)
During recording (with both analog and digital sources), the
balance of the audio recorded onto the disc can be adjusted
using the Balance menu item.
11
11
1
Press
STORE/MENU
(12, 83) to enter Menu mode.
22
22
2
Rotate
REC LEVEL/SELECT
(13)
or press
SS
SS
S (80),
TT
TT
T
(88) to select the SET BALANCE submenu.
appears on the display.
33
33
3
Press
REC LEVEL/SELECT
(13) or
ENTER
(84) to confirm.
➔ and appear on the display.
44
44
4
Adjust the recording balance by turning the
REC LEVEL/
SELECT
(13)
or press
SS
SS
S (80),
TT
TT
T (88).
55
55
5
Press
REC LEVEL/SELECT
(13) or
ENTER
(84) to confirm.
66
66
6
Press
STORE/MENU
(12, 83) to store settings.
Note:
The balance setting is not saved if a disc is changed or the
power is switched off.
CDR500U ENG 22-27 10/11/00, 9:35 AM24