Filter
Top Products
10
ENGLISH
44
44
4
To start recording press
00
00
0 (4).
➔ The display shows the real remaining time for the se-
lected recording. High speed recording starts.
lights continuously.
• To check the elapsed recording time, press
TIME
(14) or
DISPLAY
(77). This can be done during recording.
• Recording will stop automatically.
55
55
5
To stop recording manually, press
99
99
9
STOP
(5, 87).
➔
goes out and recording stops.
• If 9
STOP
(5, 87) is pressed within 3 seconds after 0 (4) is
pressed, no recording will take place.
• After recording, the display shows
for several sec-
onds. The Total time indications can differ slightly. However,
no music information is lost.
Note:
- In this Recording mode, the Pause function is not operative.
Important:
If you want to play the recorded CD-R/RW disc on any regu-
lar CD player, it must first be finalized. (See FINALIZING/
UNFINALIZNG page 15).
Finalized CD-RW discs play only on CD-RW compatible CD
players.
There is a chance that the sound will be distorted if the
recording level is set at a value that exceeds 0 dB for dig-
ital sound sources and -12dB for analog sound sources.
The factory settings at the time of shipping are 0 dB for
digital sound sources and -12dB for analog sound
sources.
RECORDING (FROM INTERNAL CD-PLAYER)
The numbers between parentheses refer to the fold-out.
Double speed recording
Using the internal CD-Player drive.
• During double speed recording the sound is not audible.
11
11
1
Make sure that the recording disc is absolutely free of
scratches and dust particles.
22
22
2
To choose the type of recording, press
REC MODE
(10).
once: to select
if you wish to make a
fast recording of a disc or programmed tracks.
three times: to select
if you wish to make a
fast recording of a disc or programmed tracks
and to automatically finalize the recording.
Also see ‘FINALIZING CD-R & CD-RW’ discs
on page 15.
The
display starts blinking. After 3 sec-
onds the display shows the remaining CD-R/RW record-
ing time on the left and total time of source on the right.
(every 2 seconds
is displayed.)
Both selection indicators are lit.
33
33
3
Press
PROG
(18 or 91) to select one or more tracks for
recording (see PROGRAMMING):
- rotate the
REC LEVEL/SELECT
(13) key to the required
track number, then press
REC LEVEL/SELECT
(13).
or:
- directly select the track number via the
10-keypad
(76)
on the remote control, then press
REC LEVEL/SELECT
(13).
MENU/
STORE
CANCEL/
DELETE
0
987
654
321
RANDOMPROG.REPEATSCAN
CD
CDR
ABC DEF GHI
JKL MN OPQ
RST UVW XYZ
DISPLAY
SPACE
SCROLL
FUNCTION
ENTER
HEADPHONE
CD RECORDER/CD PLAYER CDR500
PROG
FINAL
TEXT
LEVEL
TIME
CDPLAY MODECDR
INPUT
ERASE
MENUREC.M
POWER
IR
STANDBY
010
PUSH ENTER
REC LEVEL/SELECT
DELETE
STORE
CANCL
Recordable
ReWritable
w
w
r
w
werq
CDR500U Eng 01-14 10/11/00, 9:31 AM10