Filter
Top Products
72
ENGLISH
AMP
AUX2
AUX1
TAPE
TUNER
CD
CD-R
MD
12
LIGHT
Learning Remote Controller
RC8001SR
1.
AMP
2 31
5 64
8
0
97
MEMO
CLEAR
7.1CH
ATT
SPK-AB
DISP
OSD
THX
SLEEP
2.
8
1.
Press the AMP button on the remote controller.
2.
Press the OSD button. The following information
display will be output.
VIDEO :DVD
AUDIO :FM
SURR-MODE :AUTO
MULTIROOMA:OFF SPK:OFF
MULTIROOMB:OFF SPK:OFF
MAIN VOLUME
------------------
3.
When this display appears, press the OSD
button again. TUNER information like the
following will appear.
TUNER INFORMATION
FREQ:FM 100.10MHz
WXYZ-FM
TXT1:Pink floid
TXT2:Money
PTY :Rock
HD-SIG:MARGINAL
4.
Press the OSD button again. The information
display will go out.
Note:
• When the entire TXT1 or TXT2 character string
cannot be displayed at once, the display changes
to scrolling display. If text data cannot be received,
“---” is displayed.
SELECTING MULTICAST CHANNELS
FM HD Radio stations can transmit multiple programs
on the same frequency by using what are called
MULTICAST CHANNELS.
SOURCE
D4
D5
D2
M
D1
D3
D5
1.
2.
2.
USE
PAGE
2
D2
D1
M-DAX
ENTER
MENU
PURE DIRECT THX
7.1CH INPUT
MODE AUTO
MULTI
A/B
T-MODE
MEMORY CLEAR
DISPLAY
EXIT
SPEAKERS
BAND
MIC
U
RE DIRECT
SURROUND
SPEAKER
MULTI
DSD
L
C
R
SL S SR
LFE
DIGITAL
SURROUND
V-OFFDISP MULTI AUTO TUNED STSPKR A B
NIGHT
PEAK ANALOG
DIGITAL
ATT
SLEEP
SURR DIRECT
AUTO
DISC 6.1 MTX 6.1 EQ
PCM
AAC
1.
(Using the SR8002)
1.
Press the 3 or 4 cursor buttons on the front
panel to select the desired Multicast Channel.
(Using the remote controller)
1.
Press the > button until PAGE 2 is displayed.
2.
Press the SCAN+ (D1) or SCAN- (D2) button
to tune in the deseired Multicast channel.
When the unit receives multicast channels, the
multicast program number (
H
D
2) is displayed to
the right of the station name displayed on the
FL display.
FM WXYZ-FM 2
H
D
• This function is not available for AM HD Radio
stations because they cannot broadcast multicast
channels.
• If the received HD Radio station have multicast
channels, the unit scans for frequencies as shown
below.
Example:
When two multicast channels are broadcast by an
HD Radio station at 100.10 MHz
1.
Unit receives 99.90 MHz.
↓ (Press [SCAN +].)
2.
Unit receives the main channel of the HD Radio
station at 100.10 MHz.
↓ (Press [SCAN +].)
3.
Unit receives multicast channel 1 at 100.10
MHz.
↓ (Press [SCAN +].)
4.
Unit receives multicast channel 2 at 100.10
MHz.
↓ (Press [SCAN +].)
5.
Unit receives 100.30 MHz.
(The station at 100.10 MHz does not have a
third multicast channel, so the next frequency
(100.30 MHz) is received.)
Notes:
• If digital audio data cannot be received after the
station is selected, or if the station signal is weak,
the unit may not be able to receive the multicast
channels.
• If the station signal is weak, the digital audio of
the multicast channel may cut out. In this case,
“LOADING” is displayed on the FL display.
• If the digital signal of the multicast channel cannot
be received, “OFF AIR” is displayed on the FL
display and the main channel is selected.
• Multicast channels cannot be received on AM
broadcasts.
PTY AUTO SEARCH
You can use the Program Type information search
function for some HD Radio stations. See PTY AUTO
SEARCH on p.73.