Filter
Top Products
ENGLISH
24
REMOTE CONTROL
OPERATION (RC101)
NAME AND FUNCTION
The included remote controller can be used in multi-
room systems. Using this remote controller, you can
operate the unit through infrared receivers or the
infrared receptor of Marantz products in multiple
rooms. The SOURCE ON/OFF button and control
buttons are used in common across different input
source components.
The input source controlled with the remote controller
changes when one of the input selector buttons is
pressed.
z POWER ON and OFF buttons
(When Zone (MULTI ROOM) A/B mode is
selected)
These buttons are used to turn on or off, for the multi
room control or multi speaker control of the unit.
(When Zone D (MAIN ROOM) mode is selected)
These buttons are used to turn on or off, for the unit
in main room.
x SOURCE ON and OFF buttons
These buttons are used to turn on or off a specifi c
source (such as a DVD player) independently from
the rest of the system.
c AMP - SOURCE /Numeric buttons
SOURCE buttons
These buttons are used to switch the source of
the unit. Each time a source button is pressed, the
remote control changes to the source which was
pressed.
This remote controller can control 12 types of
equipment. To change the unit source, press this
button twice within two seconds. The signal is sent
when it is pressed the second time.
Note:
The T2 button is not used for this unit.
(When Zone (MULTI ROOM) A/B mode is
selected)
These buttons are used to select the source for the
multi room/multi speaker control of the unit.
(When Zone D (MAIN ROOM) mode is selected)
These buttons are used to select the source for the
unit in main room.
Numeric buttons
Use these buttons only for preset setting.
v AMP - VOL +/- buttons
(When Zone (MULTI ROOM) A/B mode is
selected)
These buttons are used to adjust the volume for the
multi room control or multi speaker.
(When Zone D (MAIN ROOM) mode is selected)
These buttons are used to adjust the volume for the
unit in main room.
z
⁄7
⁄6
⁄4
⁄5
⁄3
⁄2
x
c
v
b
n
m
,
.
⁄0
⁄1
b AMP - MUTE button
(When Zone (MULTI ROOM) A/B mode is
selected)
This button is used to mute the audio for the multi
room control or multi speaker control of the unit.
(When Zone D (MAIN ROOM) mode is selected)
These buttons are used to mute the audio for the unit
in main room.
n 3, 4, 1, 2 (CURSOR) / ENTER
buttons
These buttons are used when operating cursor of a
source.
(When Tuner mode (T1) is selected)
PRESET +/ PRESET - buttons
Used to select a preset station up and down.
TUNE 3 /TUNE 4 buttons
Used to tune a frequency station up and down.
m SLEEP button
(When Zone (MULTI ROOM) A/B mode is
selected)
This button is used for setting the sleep timer of multi
room control mode.
(When Zone D (MAIN ROOM) mode is selected)
This button is used for setting the sleep timer of the
unit receiver in main room.
, CONTROL buttons
These buttons are used when operating PLAY, STOP,
PAUSE and other commands of a source.
(When TUNER mode (T1) is selected)
P.SCAN button
Used to start preset scan.
CLEAR button
Used to stop preset scan.
. A/B/C/D buttons
(When TUNER mode (T1) is selected)
Used to select the band of tuner (AM/FM/XM/DAB).
(When the other source is selected)
Reserve key for the learning commands.
⁄0 SET button
This button is used to enter learn mode, preset mode
and clone mode.
⁄1 ZONE (MULTI ROOM) button
This button is used to set the zone area.
• Zone A: MULTI ROOM A
• Zone B: MULTI ROOM B
(The SR7002 does not use this zone.)
• Zone C: The unit does not use this zone.
• Zone D: MAIN ROOM
⁄2 DISC+/T.MODE
(When TUNER mode (T1) is selected)
Used to select auto stereo mode or mono mode
when the FM band is selected.
The “AUTO” indicator lights in the auto stereo mode.
(When CD/DVD/CDR mode is selected)
Used to change the disc for the CD/DVD/CDR
changer.
⁄3 INFO button
(When Zone (MULTI ROOM) A mode is selected)
When this button is pressed, the current setting for
selected multi room control of the unit is displayed on
the TV monitor.
(When Zone D (MAIN ROOM) mode is selected)
When this button is pressed, the current setting for
the unit are displayed on the TV monitor.
⁄4 MENU/INPUT button
(When DVD mode is selected)
Used to menu command.
(When TV mode is selected)
Used to select the TV video input.
⁄5 CH 3/4 buttons
These buttons are used to change channels in TV
mode and DSS mode.
⁄6 SEND indicator
Indicates when the remote controller is transmitting
a signal.
⁄7 LEARN indicator
Indicates when the remote controller is in the LEARN
mode.