Filter
Top Products
71
ENGLISH
HD RADIO AUTO TUNING
M-DAX
MENU
PURE DIRECT THX
7.1CH INPUT
MODE AUTO
MULTI
A/B
T-MODE
MEMORY CLEAR
DISPLAY
EXIT
SPEAKERS
BAND
MIC
P
URE DIRECT
SURROUND
SPEAKER
MULTI
DSD
ENTER
L
C
R
SL S SR
LFE
DIGITAL
SURROUND
V-OFFDISP MULTI AUTO TUNED STSPKR A B
NIGHT
PEAK ANALOG
DIGITAL
ATT
SLEEP
SURR DIRECT
AUTO
DISC 6.1 MTX 6.1 EQ
PCM
AAC
1.
OK
VOL
CH
PREV
MUTE
MENU
EXIT
GUIDE
LIP.SYNC
VOL
1.
You can use TUNING mode to scan for HD Radio
stations.
(Using the SR8002)
1.
Press the ENTER button on the front panel.
2.
Automatic searching begins then stops when a
station is tuned in.
(Using the remote controller)
1.
Press the OK button on the remote controller.
2.
Automatic searching begins then stops when a
station is tuned in.
Notes:
• When TUNING mode is set to a mode other than
Analog/Digital Auto mode (DIG-AT), TUNING
mode automatically changes to Analog/Digital Auto
mode.
• If tuning does not stop at the desired station, use
manual tuning. (See p.67 for the manual tuning
operation.)
SWITCHING HD-RADIO INFORMATION INTHE FRONT
PANEL FL DISPLAY
SOURCE
OFF
ON/OFF
POWER
ON
D4
D5
D2
M
D1
D3
D1
USE
PAGE
23
4
1.
2.
1.
Press the > button until PAGE 3 is displayed.
2.
Select the information with the DISP (D1)
button.
Auto display mode
Text 1 (artist name)
Text 2 (song title)
HD Radio signal strength
Frequency
When the auto display mode is displayed:
FM WXYZ-FM 1
H
D
When the unit is tuned to an HD Radio station,
the station name (call sign) is displayed on the FL
display.
Notes:
• The station name is displayed if the text data from
the HD Radio station can be received. If the signal
from the radio station is weak, text data may be
displayed intermittently or not all.
If the text data cannot be received, the frequency
is displayed. The station name is displayed if it has
been registered with the preset station name input
function.
(See p.70 for information on the PRESET STATION
NAME INPUT function.)
• When the unit receives a broadcast with multicast
channels, the multicast program number (
H
D 1) is
displayed to the right of the station name displayed
on the FL display.
When (
H
D 1) is displayed, you can select the multicast
channel. (See p.72 for information on multicast
channels.)
When the Text 1 (Artist name) is displayed:
TXT1
↓
Pink Floid
The “TXT1” is displayed for 2 seconds, followed by
the artist’s name. If artist’s name is more than 13
characters long, the text is scrolled.
Notes:
• If the signal from an radio station is weak, text data
may be displayed intermittently or not all.
• When the unit receives an analog broadcast not from
an HD Radio station but from an RBDS station, the
radio text is displayed on the FL display. (See p.73
for information on RBDS.)
TXT2
↓
Money
The “TXT 2” is displayed for 2 seconds, followed by
the song title. If song title is more than 13 characters
long, the text is scrolled.
Notes:
• If the signal from an radio station is weak, text data
may be displayed intermittently or not all.
• When the unit receives an analog broadcast not from
an HD Radio station but from an RBDS station,
the program service name is displayed on the FL
display. (See p.73 for information on RBDS.)
HD SIG:777777
• The HD Radio signal strength of the FL display
changes as shown below according to the
receiving condition.
HD SIG: ■■■■■■
SIGNAL: STRONG
(Signal strength is good)
HD SIG: ■■■■
SIGNAL: MARGINAL
(Signal strength is Marginal)
HD SIG: ■■
SIGNAL: WEAK
(Signal strength is poor)
HD SIG:
SIGNAL: NON
(Loss of the signal)