Filter
Top Products
ENGLISH
56
6 ACOUSTIC EQ
This display is for setting up the equalizer and
changing the Equalizer mode.
•
PRESET G. EQ ADJ :
“6-1 PRESET G. EQ ADJ”
(see page 57)
•
CHECK AUTO 1 & 2 :
“6-2 CHECK AUTO”
(see page 57)
EQ MODE:
There are 4 equalizer modes to choose from:
PRESET G. EQ that allows the user to manually
adjust the equalizer, and AUDYSSEY, FRONT and
FLAT that automatically adjust the equalizer from the
measurement results of the AUTO SETUP feature
(see page 46).
AUDYSSEY:
This mode adjusts the frequency characteristics
of all speakers so as to create the best listening
environment for the sound characteristics of the
listening room.
FRONT:
This mode matches the characteristics of each
speaker to those of the front speakers.
FLAT:
This mode fl attens the frequency characteristics of
all speakers. It is suited for playback of multichannel
music such as Dolby Digital and DTS.
PRESET:
This mode adjusts the graphic equalizer that
was set in PRESET G.EQ ADJ to adjust the
characteristics of each speaker (see page 57).
OFF:
The graphic equalizer is not used.
1.
Select “6. ACOUSTIC EQ” from MAIN MENU
with the 3
or
4 cursor buttons and press the
OK/ENTER button.
6.ACOUSTIC EQ.
EQ.MODE : OFF
PRESET G.EQ ADJ
CHECK AUTO
RETURN NEXT EXIT
2.
Select “EQ. MODE” with the 3
or
4 cursor
buttons.
3.
Select “FRONT”, “FLAT”, “AUDYSSEY”,
“PRESET” or “OFF” with the 1
or
2 cursor
buttons.
After you complete this portion of the setup, move the
cursor to “RETURN” with the 3, 4, 1 and 2 cursor
buttons and press the OK/
ENTER
button.
To use the remote controller (RC8001SR) to change
the EQ MODE, press the AMP button and then the
> button until the second page is displayed. When
EQ is displayed on the remote controller, press the
EQ (D5) button.
AMP
AUX2
AUX1
TAP E
TUNER
CD
CD-R
MD
12
LIGHT
Learning Remote Controller
RC8001SR
AMP
D4
D5
D2
M
D1
D3
D5
VOL
CH
USE
PAGE
2
D5
Each time this button is pressed, the EQ MODE
changes as follows.
OFF AUDYSSEYFRONT FLAT PRESET
Notes:
• “FRONT”, “FLAT” and “AUDYSSEY” can be
selected after executing the AUTO SETUP feature.
• If a speaker that was determined “NON” in Auto
Setup is manually turned on, the “AUDYSSEY”,
“FRONT” and “FLAT” modes cannot be selected.
• The equalizer turns off when the Pure Direct mode,
Source Direct mode, Dolby Headphone or Virtual
mode is set.
• ACOUSTIC EQ MODEs are not used during
playback of Dolby TrueHD, Dolby Digital Plus, or
DTS-HD signals.
• Tone Control is disabled when an EQ MODE is in
use.
6.ACOUSTIC EQ.
EQ.MODE : OFF
PRESET G.EQ1 ADJ
CHECK AUTO
RETURN NEXT EXIT
PRESET ADJUST
RESET:ALLCH 63-15.0
CH :SR 125 -2.5
250 -5.0
500 +9.0
1k +3.5
2k -5.5
4k -7.0
8k-18.5
16k-20.0
RETURN EXIT
63
125 500 2k 8k
250 1k 4k 16k
+9
0dB
CHECK AUTO
MD:AUDYSSEY 63-15.0
CH:SR 125 -2.0
250 -5.0
500 +9.0
1k +3.0
2k -5.0
4k -7.0
8k-18.0
16k-20.0
RETURN EXIT
63
125 500 2k 8k
250 1k 4k 16k
+9
0dB
-20-20