Filter
Top Products
16
English
Selecting the language for Audio/Subtitle/
Disc Menu
You can select your preferred language settings so that this
DVD system will automatically switches to the language for
you whenever you load in a disc. If the language selected is
not available on the disc, the disc’s default setting language
will be used instead.
1 Press SETUP.
2 Press 4 to select
‘PREFERENCES,’ then press
OK.
3 Press 4 to select ‘AUDIO’,
‘SUBTITLE’ or ‘DISC
MENU’, then press 2.
➜ If the language
selected is not available on
the disc, the original
language designated by
each disc will be selected.
4 Use 34 keys to select
your preference and press
OK to confirm.
5 To close the menu, press
SETUP again.
Helpful Hint:
– You must stop playback before selecting this function.
Changing and testing the speakers setting
1 Press SETUP.
2 Press 4 to select
‘SPEAKER SETUP,’ then
press OK.
3 Select ‘CNTR DELAY’,
‘REAR DELAY’ or ‘TEST,’
then press 2.
4 Use 34 keys to select
your preference and press
OK to confirm.
5 To close the menu, press
SETUP again.
Center Delay (CNTR
DELAY)
– If the listening position
is closer to the center
speaker than the front speakers, you can set the center
delay time to improve the surround sound effect.
Rear Delay
– If the listening position is closer to the rear surround
speakers than the front speakers, you can set the rear delay
time to improve the surround sound effect.
Test Tone (TEST)
– If set to ‘ON,’ the system will test the speaker settings.
The test signal is generated through the left, center, right,
and surround speakers.
Setting the digital output
Digital output selection enables you to specify the type of
digital output suitable for your DVD system.
1 Press SETUP.
2 Press 4 to select ‘AUDIO
SETUP,’ then press OK.
3 Select ‘DIGITAL OUT,’
then press 2.
4 Use 34 keys to select
your preference and press
OK to confirm.
5 To close the menu, press
SETUP again.
ALL
– If you have connected the digital output to a
multichannel decoder receiver.
PCM 96K
– If the external component is capable of processing
digital signal input with sampling rates of 96 kHz.
PCM 48K
– If the external component is incapable of processing
96 kHz digital signals input, then convert to standard signal
with sampling rates of 48 kHz.
OFF (default setting)
– To deactivate the digital output.
PREPARATIONS
SETUP MENU - - MAIN PAGE
GOTO SPEAKER SETUP PAGE
AUDIO SETUP
PREFERENCES
EXIT SETUP
SPEAKER SETUP
GENERAL SETUP
- - SPEAKER SETUP PAGE - -
LOUD SPEAKER SETUP
REAR DELAY
MAIN PAGE
CNTR DELAY
TEST
OFF
1MS
3MS
5MS
OFF
3MS
9MS
15MS
- - SPEAKER SETUP PAGE - -
SET SURROUND DELAY
REAR DELAY
MAIN PAGE
CNTR DELAY
TEST
- - SPEAKER SETUP PAGE - -
TEST TONE
REAR DELAY
MAIN PAGE
CNTR DELAY
TEST
OFF
ON
SETUP MENU - - MAIN PAGE
GOTO AUDIO SETUP PAGE
AUDIO SETUP
PREFERENCES
EXIT SETUP
SPEAKER SETUP
GENERAL SETUP
- - AUDIO SETUP PAGE - -
AUDIO OUT SETUP
DUAL MONO
MAIN PAGE
ALL
PCM 96K
DIGITAL OUT
DYNAMIC
PCM 48K
OFF
SETUP MENU - - MAIN PAGE
GOTO PREFERENCES PAGE
AUDIO SETUP
PREFERENCES
EXIT SETUP
SPEAKER SETUP
GENERAL SETUP
- - PREFERENCES PAGE - -
PREFERRED AUDIO LANGUAGE
AUDIO
DISC MENU
MAIN PAGE
ENGLISH
TV TYPE
SUBTITLE
FRENCH
PARENTAL
DEFAULTS
PASSWORD
SPANISH
CHINESE
JAPANESE
GERMAN
ITALIAN
OFF
- - PREFERENCES PAGE - -
PREFERRED SUBTITLE LANGUAGE
AUDIO
DISC MENU
MAIN PAGE
ENGLISH
TV TYPE
SUBTITLE
FRENCH
PARENTAL
DEFAULTS
PASSWORD
SPANISH
CHINESE
JAPANESE
GERMAN
ITALIAN
OFF
- - PREFERENCES PAGE - -
PREFERRED MENU LANGUAGE
AUDIO
DISC MENU
MAIN PAGE
ENGLISH
TV TYPE
SUBTITLE
CHINESE
PARENTAL
DEFAULTS
PASSWORD
FRENCH
SPANISH
JAPANESE
GERMAN
ITALIAN