Filter
Top Products
8
b. Operating Voltage
The TDA 2200 is available in two versions: one for 115V mains voltage and another for
230V mains voltage.
Check the label on the TDA 2200 rear panel and verify you have the version with the
proper voltage for your area.
The 115V version requires a mains voltage of 100V-120V at 50-60Hz with a current rating
of 8A.
The 230V version requires a mains voltage of 200V-240V at 50-60Hz with a current rating
of 4A.
The mains voltage setting for your TDA 2200 can be changed ONLY BY A QUALIFIED
ENGINEER.
WARNING: Connect the power input only to the AC so
urce printed on the
label. The warranty will not cover any damage caused by connecting to the
wrong type of AC mains.
The TDA 2200 has three power modes:
1. OFF – No circuitry is powered.
2. STANDBY – The mains transformer and amplifier section are powered off - only the
remote control input and the microprocessor is powered, so the unit can be
powered up using the remote control “STANDBY” button
3. ON – All circuits active
3. Product Registration
Please record the serial number of your amplifier here for future reference. The serial
number is printed on the label on the TDA 2200 rear panel. You will need this serial
number, should you ever require service for your TDA 2200 amplifier.
TDA 2200 serial number: _____________________