Lyngdorf Audio TDA 2200 Stereo Amplifier User Manual


 
19
j. Volume
The sub menus accessible in the Volume menu are:
Def. Volume
Max. Volume
The Default Volume setting controls the default volume at start-up and can be set from 0 to
99 dB. However, a setting over 88 is not recommended as this corresponds to max output
with full scale digital input.
The Maximum Volume setting is a safety precaution used for limiting the maximum volume
which can be achieved by spinning the wheel or increasing volume via the remote. This
can be set to avoid excessively loud sound pressure levels and/or to protect your
loudspeakers against overload.