28
The above will be displayed when exiting a successfully completed guided set-up.
Choose No if you wish to exit the guided set-up without calculating any room correction
filters, without saving the performed measurements and without setting the calibration
volume.
Choose Yes to save the results of the guided set-up and calculate the focus and the global
room correction filters.
• You can, at any time, add more room measurements
• Adding room measurements increases the accuracy of the room
correction filters
f. Calculation of Focus 1 and Global Filters
When RoomPerfect™ calculates the filters the display shows the following.
The filter calculation process can be expected to take anywhere between 5 seconds and a
minute depending on the specific task.
When RoomPerfect™ has calculated the room correction filters, they are automatically
saved. The Focus filter is saved as setting 1 and Global is saved as setting 9 out of the
possible 9 filter settings.
You have now successfully completed a guided set-up and the RoomPerfect™ Advanced
Menu is now available.