Filter
Top Products
LES 600 OPERATING INSTRUCTIONS 5
Power for Your Belt-Pack Transmitter & Microphone
1 Ensure the Belt-pack Transmitter is turned OFF.
2 Your Belt-pack Transmitter has its
internal rechargeable batteries
already installed. Connect one end
of the Charging Cable to one of the
TRANSMITTER CHARGING jacks
on the back panel of the Receiver/
Amplifier. Connect the other end
of the Charging Cable to the
INPUT charging jack on the side of
the BP-60 Belt-pack Transmitter as
shown in the illustration.
3 The battery charging indicator LED (labeled CHARGING)
lights green when the Transmitter is connected with a
charging cable to the TRANSMITTER CHARGING jack on
the back panel of the Receiver/Amplifier. When charging is
complete (8-12 hours), the CHARGING indicator light will
turn off.
Note The internal
rechargeable batteries are
not completely charged
when shipped. They must
be fully charged for 8 or
more hours before regular
classroom operation.
Step2