Filter
Top Products
LES 600 OPERATING INSTRUCTIONS 11
and Telex transmitters use 2.5mm and
3.5mm audio input jacks, respectively.
With the Receiver/Amplifier turned
ON, increase the Mixed Audio Output
LEVEL ADJUST slowly clockwise until
you reach a comfortable volume.
Connecting to A LightSPEED CX-50 Receiver
A 1/4” phone-to-RCA cable is used. The 1/4” phone plug goes
into the AF OUT jack on the back of the CX-50. The RCA plug
is inserted into AUXILIARY INPUT jack on the Receiver/
Amplifier. For the best sound quality, the volume adjustment
on the front of the CX-50 should be turned clockwise as far as
it will go. Depending on which AUX INPUT jack is selected,
the audio output is adjusted using AUX1 or AUX2 VOLUME
controls on the front of the Receiver/Amplifier.
Note If you have any
questions regarding the
connection of assistive
listening devices contact
LightSPEED for technical
assistance at
1-800-732-8999.