LightSpeed Technologies LES 600 Series Stereo Amplifier User Manual


 
Power and Volume Switch for Microphones:
Rotating the Mic 1 Volume control or Mic 2 Volume control
clockwise past the first “click” turns the LES 600 on.
Continuing to rotate this knob clockwise will increase the
volume of the wireless microphone through the speaker
system.
Aux1 and Aux2 Volume Control:
Rotating the Auxiliary Volume Control clockwise increases the
loudness of an audio source connected to the AUXILIARY
INPUT jack (located on the back panel).
Battery Charging Indicator
These indicators light when a Transmitter is connected to one
of the TRANSMITTER CHARGING jacks (located on the back
of the Receiver/Amplifier, labeled 14 & 15 on the following
diagram). When charging is complete the indicator turns off.
4 & 9
8 & 10
11 &12
LES 600 OPERATING INSTRUCTIONS 15
Note The LES 600 comes standard with
a single wireless receiver that is controlled
using MIC1 VOLUME. If an optional second
wireless receiver is installed, the second receiver
is controlled using MIC2 VOLUME.