Filter
Top Products
43
7532 Operation
5.5.3 Commuwin II-Operating Program
Commuwin II is an operating software with graphical support for intelligent transmitters
with the communication protocols Rackbus, Rackbus RS 485, INTENSOR, HART or
PROFIBUS-PA. It is compatible with the operating systems Win 3.1/3.11, Win95, Win98
and WinNT4.0. All functions of Commuwin II are supported. The configuration is made
via operating matrix or graphic surface. A envelope curve can be displayed in ToF Tool.
Note!
Further information on Commuwin II is given in the following Varec documentation:
•System Information: SI 018F/00/en “Commuwin II”
• Operating Manual: BA 124F/00/en “Commuwin II” operating program
Connection
The table provides an overview of the Commuwin connections.
Note!
The 7500 RTG can also be operated locally using the keys. If operation is prevented by
the keys being locked locally, parameter entry via communication is not possible either.
Interface Hardware Server Device list
HART Commubox FXA 191 to HART
Computer with RS-232C interface
HART Connected instrument
Interface FXN 672
Gateway for MODBUS, PROFIBUS,
FIP, INTERBUS, etc.
Computer with
RS-232C interface or
PROFIBUS card
ZA 673 for
PROFIBUS
ZA 672 for
other
List of all rack bus modules:
the required FXN 672 must
be selected