Filter
Top Products
23
7532 Mounting
3.4.5 Mounting with Sample hatch on stilling well
Installation tips
For control and cleaning purposes as well as for hand dipping (tape), a sample hatch
gauging is recommended. The sensor head can be easily checked in the area of the
opening. Manual gauging with gauge rod or tape is possible without removal of the
transmitter. The lower edge of the opening is the reference for the gauging. The
construction is only suitable for non-pressurized operation.
Note!
The nozzle for manual gauging is not part of the standard offering from Varec. Please
contact Varec for further information.
2)Only dimensions adapted to standard. Designed for non-pressurized operation only,
therefore thickness of flange can be reduced (e.g. 8mm).
Flange DN150 DN200 DN250/300 Flange ANSI 6" ANSI 8" ANSI 10"
PN [lbs]
2)
16 16 16 PN [lbs]
2)
150 150 150
A [mm] 110 140 170 A [mm] 110 140 170
L [mm} — 300 450 L [mm] — 300 450
L00-FMR53xxx-06-00-00-en-004