Filter
Top Products
IB-HT395-WM-E-073003
REMOTE CONTROL OPERATION
Remove the BATTERY COMPARTMENT DOOR of the REMOTE
CONTROL and insert 2 size AAA alkaline batteries (included)
according to the and markings inside the BATTERY
COMPARTMENT of the REMOTE CONTROL unit.
Tips on Battery Use
Battery Installation Remote Control Operating Range
Point the REMOTE CONTROL unit within 20 feet from the
remote control sensor and facing the front of the HOME
THEATER SYSTEM.
Tips on REMOTE CONTROL Operation
Point the REMOTE CONTROL at the
Home Theaters Front
Make sure there is a clear path between the REMOTE
CONTROL and the HOME THEATER SYSTEM so that the signal
is not blocked.
6
Gently push here and slide to
open the BATTERY DOOR.
Insert 2 size AAA batteries
as shown (included).
The REMOTE controls operating distance may vary
according to the brightness of the room.
Do not point bright lights at the REMOTE CONTROL
SENSOR (like laser pointers).
Do not place objects between the REMOTE CONTROL unit
and the REMOTE CONTROL SENSOR.
Do not use this REMOTE CONTROL while simultaneously
using the remote control unit of any other equipment, the
signals may mix.
Sometimes your TVs remote may cause an LED to flash,
you can ignore this.
Replace the door.
Reversing polarities will damage the batteries and possibly
your REMOTE. Be sure to follow polarity + and - as indicated.
Do not mix different types of batteries together (Alkaline,
Carbon-Zinc, Nickel-Cadmium etc.), or old batteries with new
ones.
When not in use for an extended period of time (over 60
days), remove the batteries to prevent possible acid leakage
or corrosion resulting in possible damage to your REMOTE
CONTROL.
When the batteries have become discharged, they must be
disposed of in a safe manner that complies with all applicable
laws.
Installation of batteries should only be done by an adult
(for safety).
+
Remember, the spring touches the side of each
battery.