Filter
Top Products
IB-HT395-WM-E-073003
LOCATION OF CONTROLS
9. GAME indicator - For TV GAME or VIDEO CAMERA
sound use, press the SOURCE button till this lights or
press the GAME button on your REMOTE control.
10. TV / VCR indicator - For TV / VCR sound use, press the
SOURCE button till this lights or press the TV / VCR
button on your REMOTE control.
11. AUX indicator - For Auxiliary input sound use, press the
SOURCE button till this lights or press the AUX button on
your REMOTE control.
12. STEREO indicator - In STEREO mode, this red indicator
lights up (for 2 channel sound).
13.DOLBY PRO LOGIC indicator - If a Dolby Pro Logic
Signal is received, this red indicator will light.
14.DOLBY DIGITAL indicator - If a Dolby Digital Signal
is received, this orange indicator will light.
15.VOLUME indicators - These indicators light up
showing the level of the master volume, also each
individual speakers volume.
16.MUTE indicator - In mute mode, this indicator will light.
17. SOURCE button - Press several times to select the sound
input source you want: DVD COAXIAL, DVD OPTICAL,
GAME, TV / VCR, or AUX.
18.MASTER VOLUME UP & DOWN control - Increases or
decreases the volume level of all speakers.
8. TV/VCR AUDIO INPUT jacks - Connect to audio output
of a TV or VCR.
1. MAIN POWER button - Press to switch the set on or off.
NOTE: This button must be on in order to be able to use
the REMOTE control.
2. REMOTE CONTROL SIGNAL sensor - Receives the
signal from the REMOTE CONTROL (Aim the REMOTE
control towards this sensor).
3. POWER/STANDBY indicator - This indicator has 2
colors: red and green (red is standby, green is on). When the
set is off (standby), pressing the SOURCE or MASTER
VOLUME buttons on the main unit, or pressing any button
on the REMOTE CONTROL will turn the set on. The
indicator will become green. Also this indicator will flash
confirming that you pressed any button on the REMOTE
CONTROL.
4. VIDEO IN jack - For connection of a video signal from a
TV game or video camera (see details on Page 16 & 17).
5. AUDIO LEFT jack - Connect to the left channel audio
output of a TV game or video camera.
6. AUDIO RIGHT jack - Connect to the right channel
audio output of a TV game or video camera.
7. DVD COAXIAL indicator - For DVD COAXIAL INPUT sound
use, press the SOURCE button till this lights or press the
COAXIAL button on your REMOTE control.
8. DVD OPTICAL indicator - For DVD OPTICAL INPUT sound
use, press the SOURCE button till this lights or press the
OPTICAL button on your REMOTE control.
4
1. FRONT RIGHT SPEAKER jacks - Connect the FRONT
RIGHT SPEAKER to the red and black terminals.
2. FRONT LEFT SPEAKER jacks - Connect the FRONT LEFT
SPEAKER to the red and black terminals.
3. CENTER SPEAKER jacks - Connect only the CENTER
SPEAKER to the blue and black terminals.
4. REAR RIGHT SPEAKER jacks - Connect the REAR RIGHT
SPEAKER to the grey and black terminals.
5. REAR LEFT SPEAKER jacks - Connect the REAR LEFT
SPEAKER to the grey and black terminals.
6. SUBWOOFER SPEAKER jacks - Connect the
SUBWOOFER SPEAKER to the green and black terminals.
7. AUX AUDIO INPUT jacks - Connect to the audio output of a
tape deck or other component.
9. VIDEO OUT jack - Connect to your TVs video input jack.
(If your TV has no VIDEO jack, you have to buy a VIDEO
RF MODULATOR.)
IMPORTANT: This jack is only used if you are connecting
a TV GAME or VIDEO CAMERA to the set.
10.DVD VIDEO INPUT jack - Connect to your DVDs video
out jack.
11. DVD COAXIAL DIGITAL INPUT jack - Connect to the
COAXIAL digital audio output of a DVD player to have
Dolby Digital 5.1 channel surround sound.
12. DVD OPTICAL DIGITAL INPUT jack - Connect to the
OPTICAL digital audio output of a DVD Player to have
Dolby Digital 5.1 channel surround sound.
13.AC LINE CORD - Connect to a 120V/60Hz AC
standard wall outlet.