Filter
Top Products
IB-HT395-WM-E-073003
1. Insert the stereo audio cables into the AUDIO INPUT L (left=white) and R (right=red) jacks on the FRONT of your
HOME THEATER SYSTEM, and into the corresponding AUDIO OUT jacks on your VIDEO CAMERA, this will allow
your CAMERA VIDEOs sound to play through your HOME THEATER SYSTEM. (NOTE: Many video cameras have
special plugs on one side to connect to your camera.)
2. Insert the video cable (included with your VIDEO CAMERA) into the VIDEO IN jack on the FRONT of your HOME
THEATER SYSTEM, and into the VIDEO OUT jack on your VIDEO CAMERA. (NOTE: Your video camera may have a
3.5mm triple jack, consult your cameras booklet for details.)
3. Insert the video cable (included) into the VIDEO OUT jack on the back of your HOME THEATER SYSTEM, and into the
VIDEO IN jack on your TV.
NOTE: Your VIDEO CAMERA sound will come out of the 2 front speakers plus the subwoofer since the default
setting for the sound output is the same as the audio source from the VIDEO CAMERA (2 channel,
STEREO). For Dolby Pro Logic (5.1 channel) sound reproduction, press the SURROUND button. The sound
will come out of all 5 speakers plus the subwoofer.
NOTE: Some video cameras may not allow the Home Theater to play all 5 speakers if the audio output level of the
video camera is too low.
4. Insert the AC power cord into an AC outlet.
5. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
ON/STANDBY button on the REMOTE to turn the set on (or off).
6. Press the SOURCE button several times till the GAME indicator lights. (This setting is either for a Video Camera or a
TV Game.)
7. Make sure your VIDEO CAMERA is on and follow your VIDEO CAMERAs instructions.
8. Go to Page 20 for detailed instructions.
TV + VIDEO CAMERA CONNECTIONS
17
Home Theater System + TV + Video Camera
NOTE: Your VIDEO CAMERA
may have a special cable (with a
triple 3.5mm plug on one side)
for connections. This diagram is
only for illustration.
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).