Filter
Top Products
IB-HT395-WM-E-073003
24
OTHERS
EQ Mode
You can press EQ button repeatedly on the REMOTE CONTROL to choose from
7 different tone effects:
Standard, classical, jazz, rock, pop, ballad & dance.
The volume indicators will change according to different EQ mode as follows:
Standard
Classical
Jazz Rock
Ballad
Dance
Pop
NIGHT Mode
This reduces the speaker output level to avoid annoying others with loud sounds.
NOTE: This function is only working when the set is in DVD digital Dolby AC-3 mode.
Pressing the NIGHT button on the REMOTE CONTROL to choose night mode. The signal dynamic range will be decreased by 10 dB.
All the volume indicators on the front panel will light instantly and go back to the original mode after 2 seconds.
All indicators light up
The original volume level
Press the NIGHT button again to cancel the night mode. The signal dynamic range will resume to the original value. All the VOLUME
INDICATORS on the front panel will go off instantly and go back to the original mode after 2 seconds.
NOTE:
Each type of equalizer setting is
indicated by different indicators
lighting up.
Some rooms will reproduce the sound effects of a theater if several of the speakers have a slight time delay. This set allows you to
adjust the time delay of the CENTER & REAR speakers by using the remote control.
NOTE: 1 millisecond (1/1000 of a second) equals approximately 1 foot of sound travel.
To set the sound delay of the CENTER or the REAR speaker, press the CENTER or REAR delay button, then press the
or
button.
CENTER / REAR SPEAKERS SOUND DELAY
A. When in Dolby Digital 5.1 channel mode:
For the Rear speakers, the factorys default setting is 6ms, the delay allowance is 0 ~ 15ms. Each press will reduce or increase a
3ms delay.
For the Center speaker, the factorys default setting is 0 ms, the delay allowance is 0 ~ 5ms. Each press will reduce or increase a
1ms delay.
B. When in Dolby Pro Logic mode, you can only adjust the delay time of the rear speakers, the factorys default setting is 21ms and
the delay allowance is 15 ~ 30ms. Each press will increase or decrease a 3ms delay.
First LED lights
Second LED lights
Middle LED lights 4th LED lights
Last LED lights
First 2 LEDS light
2nd & 3rd LEDS light