Filter
Top Products
IB-HT395-WM-E-073003
TV + TV GAME CONNECTIONS
Home Theater System + TV + TV Game
16
1. Insert the stereo audio cables into the AUDIO INPUT L (left=white) and R (right=red) jacks on the FRONT of your
HOME THEATER SYSTEM, and into the corresponding AUDIO OUT jacks on your TV GAME, this will allow your
TV GAMEs sound to play through your HOME THEATER SYSTEM.
NOTE: Your TV GAME may also have an optical jack for sound output. If you have an optical cable, you may connect your
TV GAMEs output to the HOME THEATER by using the optical cable for better sound (optical cable is not included).
2. Insert the yellow video cable (included with your TV GAME) into the VIDEO IN jack on the FRONT of your HOME
THEATER SYSTEM, and into the VIDEO OUT jack on your TV GAME.
3. Insert another video cable into the VIDEO OUT jack on the back of your HOME THEATER SYSTEM, and into the VIDEO IN
jack on your TV.
NOTE: Your TV GAMEs sound will come out of the 2 front speakers plus the subwoofer since the default setting for the
sound output is the same as the audio source from the TV GAME (2 channel, STEREO). For Dolby Pro Logic
(5.1 channel) sound reproduction, press the SURROUND button on the REMOTE. The sound will come out of
all 5 speakers plus the subwoofer.
NOTE: Some TV GAME may not allow the Home Theater to play all 5 speakers if the audio output level of the TV
GAME is too low.
4. Insert the AC power cord into an AC outlet.
5. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
ON/STANDBY button on the REMOTE to turn the set on (or off).
6. Press the SOURCE button several times till the GAME indicator lights.
NOTE: In case you use an OPTICAL cable for sound, press OPTICAL on your remote for the TV GAME sound.
7. Make sure your TV GAME is on and follow your TV GAMEs instructions.
8. Go to Page 20 for detailed instructions.
NOTE: Your TV GAME may have
a special cable for connections.
This diagram is only for
illustration.
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).
(Optical cable is not included)