Filter
Top Products
15
Section 6: Options
11/01/12
LR0548, LR0560, LR1560, LR1572, LR1584 & LR1596 Landscape Rakes 302-185M
Table of Contents
LR05 Dual Gauge Wheel
Note: Arm of Dual Gauge Wheel provides a mount to support a grader blade.
Kit Bundle
302-258A . . . . . . . . . DUAL GAUGE WHEELS-Solid 2 3/4" x 8 1/4"
LR15 Dual Gauge Wheel
Note: Arm of Dual Gauge Wheel provides a mount to support a grader blade.
Kit Bundles
302-176A . . . . . . . . . DUAL GAUGE WHEELS-Narrow
302-174A . . . . . . . . . DUAL GAUGE WHEELS-Wide
LR15 Flip Down Grader Blade
Note: LR15 grader blade assembly is complete with side plates only. Grader Blade Mounting Arms must be
purchased separately if Dual Gauge Wheels are not mounted on the Landscape rake.
Kit Bundles
302-152A . . . . . . . . . 5’ GRADER BLADE
302-105A . . . . . . . . . 6' GRADER BLADE
302-106A . . . . . . . . . 7' GRADER BLADE
302-107A . . . . . . . . . 8' GRADER BLADE
LR15 Grader Blade Mounting Arm
Note: Two Grader Blade Mounting Arms are required to support a Flip Down Grader Blade.
302-260A . . . . . . . . . GRADER BLADE MOUNT LESS DUAL GAUGE WHEEL
LR15 Support Stand (Accessory)
LR15 Series Landscape Rakes with serial number 475594 and higher are factory supplied with a support stand. You
may purchase an accessory support stand from your nearest Land Pride dealer if the serial number on your rake is
475593 or below. Assembly instructions are included with the stand.
Kit Bundle
300-196A . . . . . . . . . LR15 SUPPORT STAND
Rear Blade Attachments (Accessory)
The rake assembly can be removed from the main frame and a RB15 Series rear blade assembly can be attached to
the frame to give the Land Pride Rake versatility. The rear blade is not available in the 96" width. Be careful not to
overstress the rear blade while back-filling as load forces on the blade and frame increase while backing-up.
Kit Bundles
301-115A . . . . . . . . . 60" REAR BLADE ASSEMBLY (S/N 33160 & Above)
301-116A . . . . . . . . . 72" REAR BLADE ASSEMBLY (S/N 33160 & Above)
301-117A . . . . . . . . . 84" REAR BLADE ASSEMBLY (S/N 33160 & Above)
Section 6: Options