Filter
Top Products
8
Section 2: Optional Equipment Set-up
LR0548, LR0560, LR1560, LR1572, LR1584 & LR1596 Landscape Rakes 302-185M
11/01/12
Table of Contents
Dual Gauge Wheel (LR05 Series)
Refer to Figure 2-1:
Gauge Wheel Assembly
1. Attach gauge wheel arm (#1) to right-hand side of
rake mount (#7) with four 3/8" x 2 1/4" GR5 hex head
cap screws (#8), 3/8" lockwashers (#9), and 3/8" hex
nuts (#10) as shown. Tighten to proper torque.
2. Insert two bushings (#5) onto gauge wheel arm (#1)
as shown.
3. Insert yoke with tire assembly (#2) through 1/2"
spacer (#3), 1" spacer (#4), bushings (#5), and two
1" Spacers (#4) as shown. Secure with linch pin (#6).
4. Repeat steps 1 - 3 to assemble gauge wheel on the
left-hand side of the rake.
Section 2: Optional Equipment Set-up
LR05 Dual Gauge Wheel Assembly
Figure 2-1
20988
(Rake teeth removed
for clarity)