Filter
Top Products
Unpacking
Open the shipping box, which contains:
1 amplifier unit (packed in foam end-caps)
4 ribbon connection cables
Fuses
2 AGC- ~ (~-amp) speaker fuse
1 slow-blow (20 amp for 100/120V or 12 amp for 220/240V) line fuse
1 12 VDC output (12 V trigger) cable
1 T-15 Torx wrench
1 packet containing the owner’s reference manual and the warranty registration
card.
IMPORTANT
Two people are needed to remove the amplifier from the shipping box.
1. One person grasps the underside of the foam end-caps at one end of the amplifier;
at the same time, the second person grasps the underside of the foam end caps at
the other end of the amplifier.
2. Slowly lift the amplifier straight out of the shipping box.
3. Place the amplifier in a safe location and remove the protective plastic wrapping.
Notes
/f any of these items are not included in the shipping box, please contact your
authorized Krell dealer, distributor, or Kre// for assistance.
Save all packing materials. If you ship your amplifier in the future, repack the unit in its
original packaging to prevent transit damage. See Return Authorization Procedure,
on page 22, for more information.
Krell KAV-1500 Amplifier
3