Filter
Top Products
Back Panel Description: KAV-1500
See Figure 2 on page 7
The KAV-1500 back panel provides connections for all inputs and outputs, remote
connection input and output links, and AC power supply.
Balanced Inputs
3, 4, 5, 6, 7 Inputs
These are the right surround (3), left surround (4), center (5), right (6), and
KAV-1500 channel inputs for output devices with balanced XLR connectors.
Single-ended Inputs
8, 9, 10, 11, 12 Inputs
These are the right surround (8), left surround (9), center (10), right (11), and left
KAV-1500 channel inputs for output devices with single-ended RCA connectors.
See Reconfiguring the KA V-1500 for MAT, on page 14, and Reconfiguring the
KAV-1500 for Bridged Operation, on page 16, for information on optional system
configurations.
Multi-channel Input
13 Multi-channel Input
This is the DB-25 input, for connecting to the DB-25 output of a preamp/processor. The
DB-25 input incorporates all five channels plus a 5 VDC (5 Volt trigger), and allows you
to send all audio signals and turn the amplifier on and off via a single cable.
Amplifier Channel Outputs
14, 15, 16, 17, 18 Outputs
These are the right surround (14), left surround (15), center (16), right (17), and left
KAV-1500 amplifier channel outputs with five-way loudspeaker binding posts. The
loudspeaker binding post terminals accept spade lugs, bare wire, banana plugs, or
pins. Use the red terminal for the positive connection and the black terminal for the
negative connection.
See Input and Output Connections, on page 10, Connecting the KA V-1500
Reconfigured for MAT, on page 14, and Connecting the Bridged KA V-1500, on
page 17, for more information on amplifier channel output connections.
8
Krell KAV-1500 Amplifier