Filter
Top Products
Definition of Terms, continued
Single-ended
A two-wire input or output circuit, Use care when using single-ended connections, in
which the ground, connection is made last and broken first. Turn the system off prior to
making or breaking single-ended connections. Single-ended connections are not
recommended for configurations requiring long cable runs.
Multi-channel (DB-25)
A balanced input or output circuit that allows for the simultaneous connection of all
audio outputs plus one 5 VDC (5 Volt tdgger) via a single cable. DB-25 inputs and
outputs are becoming popular for connecting multi-channel AN processors and power
amplifiers, simplifying the integration of the two components into your system.
OPERATION
Off
When the power button on the front panel is pressed and the blue power LED turns off,
the component is off.
Operational Mode
When the power button on the front panel is pressed and the blue power LED
illuminates, the component is in the operational mode and ready to play music.
Stand-by Mode
A low power consumption status that keeps the audio and regulator circuits at idle. Krell
recommends leaving the component in the stand-by mode when it is not playing music.
2
Krell KAV-1500 Amplifier