Filter
Top Products
KAV-1500
Five-Channel Power Amplifier
Instructions for Use
v 00.0
Krell Industries, Inc.
45 Connair Road
Orange, CT 06477-3650 USA
TEL 203-799-9954
FAX 203-891-2028
E-MAIL krell@krellonline.com
WEBSITE http://www, krellonline.com
This product complies with the EMC directive (89/336/EEC) and the low-voltage directive (73/23/EEC).
WARNINGS
The amplifier must be placed on a firm,/eve/surface where it is not exposed to dt~pping or splashing.
The ventilation grids on the top of the amplifier and the space underneath the amplifier must be unobstructed
at all times during operation. Do not place flammable material above or beneath the amplifier.
Contact your authorized Krel/ dealer, distributor, or Krell before using any devices designed to alter or stabi-
lize the AC power for the KAV-1500.
Before connecting the KAV-1500, make sure the amplifier is turned off and any output device (such as
preamplifier) is in mute or stand-by mode. Make sure all cable terminations are of the highest quality and
free from frayed ends, short circuits, or cold solder joints.
Use only one set of inputs to the amplifier at a time.
After reconfiguring for MAT, do not use more than one input at a time.
After bridging, one channel must remain unbridged.
THERE ARE NO USER SERVICEABLE PARTS INSIDE ANY KRELL PRODUCT.
Please contact your authorized Krell dealer, distributor, or Krell if you have any questions not addressed in
this reference manual.
This product is manufactured in the United States of Amedca. Krell
®
is a registered trademark of Krell Industries, Inc., and is restricted for use by Krell
Industries, Inc., its subsidiaries, and authorized agents. Multi Amp Throughput
TM
is a trademark of Krell Industries, Inc. All other trademarks and tradenames
are registered to their respective companies.
© 2000 by Krell Industries, Inc. All rights reserved P/N 303961