Kenwood TS-590S Stereo System User Manual


 
8 EXPANSIVE APPLICATION SOFTWARE
TS-590S CONTENTS 65
Configure the necessary settings to use ARVP-10R.
Select “ARVP-S10R Settings” from the File pulldown menu and click the “Add...” button in the
ARVP-10R Settings dialog box and the Detailed Settings dialog box will appear. In Detailed
Settings dialog box, you can set the connection name, IP address, the port number, user name and
password.
Figure 8-15 Detailed Settings Dialog Box (ARVP-10R)
To connect ARVP-10R to ARVP-10H, after above setting is complete, click the “Connect” button in
the main window.
To disconnect ARVP-10R and ARVP-10H, click the “Disconnect” button in the main window.
ARVP-10H and ARVP-10R have no function to adjust volume. Instead, use the volume mixer or
volume control in Windows to adjust volume.
8.6.4 Setup of ARVP-10R (remote station)
8.6.5 Connecting and Disconnecting ARVP-10R (Remote Station)
8.6.6 Adjusting Volume