Filter
Top Products
8 EXPANSIVE APPLICATION SOFTWARE
62 CONTENTS TS-590S
Figure 8-11 Device Tab
In the “Reception Output” of the Transceiver frame, “Microphone (USB Audio CODEC)” must be
selected.
In the “Modulation Input” of the Transceiver frame, “Speaker (USB Audio CODEC)” must be
selected.
In the “Microphone” of the PC frame, specify the microphone of the sound device.
In the “Speakers” of the PC frame, specify the speaker of the sound device.
You can check the name of the sound device in the entry under “Sound video and game controllers”
category in Windows Device Manager.
To start ARUA-10, after above settings completes, right click the “ARUA-10” icon in the Windows task
tray and select “Start” in the menu.
To stop ARUA-10, right click the “ARUA-10” icon in the Windows task tray and select “Stop” in the
menu.
To adjust volume of ARUA-10, right click the “ARUA-10” icon in the Windows task tray and select
“Volume” in the menu and from the volume screen adjust volume.
For details, refer to “TS-590S USB Audio Setting Manual” on the Kenwood’s website.
ARUA-10 is capable of starting automatically at the start of Windows. With this capability enabled,
ARUA-10 starts and connection is made automatically upon restart of a PC.
To enable this capability, right click the “ARUA-10” icon in the Windows task tray and select “Other
settings” in the menu, and the Setup dialog will appear. In the Other tab, click on the Run
automatically at Windows startup checkbox.
8.5.4 Starting and Stopping ARUA-10
8.5.5 Adjusting Volume
8.5.6 Automatic Execution when Windows Starts