Kenwood TH-K2ET Stereo System User Manual


 
79
Transmitting a Stored DTMF Number
1 While pressing and holding [PTT], press [MENU].
2 Release [MENU] (continue pressing [PTT]), then
turn the Tuning control to select the desired DTMF
memory channel number.
3 While still holding [PTT], press [MENU] again to
transmit the selected DTMF tones.
The number stored in the channel scrolls across the
display, accompanied by DTMF tones from the
speaker.
After transmission, the frequency display is restored.
TH-K2AT/ ET/ K4AT only: If you do not need to confirm the
memory channel contents, press [0] ~ [9] instead of turning
the Tuning control in step 2, to select a channel number. The
stored DTMF number will be immediately transmitted. (You
do not have to press [MENU] in step 3.)
Note: If you select an empty DTMF memory channel and press
[MENU], the frequency display is restored.