Kenwood TH-K2ET Stereo System User Manual


 
46
Recalling a Memory Channel
Using the Tuning Control
1 Press [MR] to enter Memory Recall Mode.
The memory channel last used is recalled.
2 Turn the Tuning control to select your desired
memory channel.
You cannot recall an empty memory channel.
To restore VFO Mode, press [VFO].
Using a Numeric Keypad (TH-K2AT/ ET/ K4AT only)
You can also recall a memory channel by entering a
desired memory channel number with the keypad.
1 Press [MR] to enter Memory Recall Mode.
2 Press [#], then enter the channel number using
2 digits.
For example, to recall channel 49, press [#], [4],
[9].
You can also enter a memory channel number that
is less than 10 by pressing [#] after entering the
channel number. For example, to recall memory
channel 9, press [#], [9], [#]. You can also press
[#], [0], [9].