Kenwood TH-K2ET Stereo System User Manual


 
20
Selecting a Frequency
VFO Mode
This is the basic mode for changing the operating
frequency. Turn the Tuning control clockwise to
increase the frequency and counterclockwise to
decrease the frequency.
MHz Mode
If the desired operating frequency is far away from
the current frequency, it is quicker to use the MHz
Tuning Mode.
To adjust the MHz digit:
1 Press [F].
The MHz digit blinks.
2 Turn the Tuning control to select the desired MHz
value.
3 After selecting the desired MHz value, press [F]
to exit the mode and return to normal VFO Mode.
4 Continue adjusting the frequency as necessary,
using the Tuning control.