Kenwood TH-K2ET Stereo System User Manual


 
58
While in Channel Display Mode, only the following keys
can be operated.
[KEY]
TTPPMALLQS/INOMF#
1
RMLLAC gninuT lortnoc
1
TH-K2AT/ ET/ K4AT only
[F] then
TTPPMAL
1
LQS/INOMUNEMF
1
The light stays ON until [F], [LAMP] is pressed again {page 88}.
[KEY] (1 s)
FRMLLAC
While transmitting:
PMALUNEMLLAC
1
gninuT lortnoc
2
1
1750 Hz tone is transmitted (TH-K2E/ K4E) {page 36}. DTMF D tone
is transmitted (TH-K2AT/ ET/ K4AT) {page 76}.
2
DTMF keypad, [0] ~ [9], [ ], [#], and [F] (A tone) ~ [CALL] (D tone)
also works (TH-K2AT/ ET/ K4AT only) {page 76}.
To recover normal operation, turn the transceiver OFF
and press [PTT]+[MR]+[ ] (POWER) again.
Note:
To enter the Channel Display Mode, you must have at least one
memory channel that contains the data.
If the memory channel contains the Memory name data, the
Memory name is displayed in place of the “CH” characters.