Kenwood TH-K2ET Stereo System User Manual


 
34
1 Press [MENU].
2 Turn the Tuning control to select Menu No. 8
(OFFSET).
3 Press [MENU].
4 Turn the Tuning control to select the appropriate
offset frequency.
The selectable range is from 0.000 MHz to 69.950
MHz in steps of 50 kHz.
5 Press [MENU] to store the setting or [PTT] to
cancel.
6 Press any key other than [LAMP], [MONI/SQL],
and [MENU] to exit Menu Mode.
TH-K4E only: If you have selected “ ” for the offset direction, you
cannot change the default (–7.6 MHz) offset frequency.
Note: After changing the offset frequency, the new offset
frequency will also be used by Automatic Repeater Offset.
Activating the Tone Function
1 Press [MENU].
2 Turn the Tuning control to select Menu No. 2
(T.CT.DCS).