Kenwood TH-K2ET Stereo System User Manual


 
90
Note:
Turn the transceiver OFF before connecting the optional speaker
microphone.
While Menu No. 31 (PC) is ”ON“ {page 107} or the Lock function
is ON {page 88}, you cannot program PF keys.
If the LOCK switch on the rear of the microphone is ON, you
must move the switch to the OFF position to program the keys.
1 Press one of the following key combinations to
reprogram the keys on the speaker microphone.
Press Mic [1]+[ ] (POWER) to reprogram Mic [1].
Press Mic [2]+[
] (POWER) to reprogram Mic [2].
Press Mic [3]+[
] (POWER) to reprogram Mic [3].
2 Press a key or the key combination you want to
assign to the microphone key.
]YEK[ ]YEK[+]F[ noitcnuF
OFVOFVM refsnarTOFV
RMRMNI.M
LLACLLACzH0571/NI.C
PMALPMAL
3
.NOsyatspmaL
/INOM
LQS
/INOM
LQS
tnemtsujdahcleuqS
TTP
1
TTPgnittesrewopegnahC
UNEMUNEMesreveR
gninuT
2
lortnoc
gninuT
2
lortnoc
nwoD/pU
1
You can press [PTT] to assign a function key to alternate VFO
and Memory Recall Mode.
2
Tuning control (Up or Down) can also be programmed.
3
The light stays ON until you press [F], [LAMP] again {page 88}.