Filter
Top Products
7
EN
ENGLISH
Names and functions of parts
Remote control unit
This remote control unit can be used not only for Kenwood products but also for other non-Kenwood products by setting the appropriate manufacturer’s
setup codes. ·
If the name of a function on the receiver
is different from the one’s on the
remote control, the name of the remote
control key in this manual is indicated
in parentheses.
5 Disc Skip key
If CD is selected as the input source, this
key functions as the multi-CD player disc
skip key.
Last/ A/B key
If TAPE is selected as the input source,
this is A and B deck of a double cassette
deck.
Use to operate other components.
6 Disc Sel. key
Use to operate other components.
Input Sel. key
Use to operate other components.
7 CH +/– keys
Use to select the channels.
¢ / 4 keys
If CD, MD and DVD as the input source,
these keys function as skip keys.
8 TV Input key
Use when in TV operation.
9 TV VOL +/– keys
Use to adjust the TV’s volume.
0 1/¡ keys
If CD, MD or Tape is selected as the
input source, this key functions as
search keys.
Tune – / + keys ¶
Use to operate the tuner mode.
! 8 key
Use to operate other components.
Dimmer key
Use to select the REC MODE. §
Use to adjust the brightness of the display.
fl
@ 3/8 key
If CD is selected as the input source, this
key functions as the play/pause key.
If MD or TAPE key is selected as input
source, this key functions as the play key.
Band key ¶
Use to select the broadcast band.
# 2 key
If Tape is selected, this key functions as
reverse play key.
Info/Flip key
Use to operate other components.
$ Listen Mode 5/∞ keys ›
Use to select the listening mode.
% DSP Mode key ›
Use to select any of the DSP mode.
^ Active EQ key ¢
Use to select ACTIVE EQ’s setting.
& THX key ›
Use to switch the status of THX.
* Stereo key ›
Use to switch the listen mode to STEREO.
( LCD (Liquid Crystal Display)
) TV key
Use to select the TV equipment.
¡ POWER RCVR (
receiver
) key (
Use to turn the receiver on or off.
™ TV Power key
Use to turn the TV on or off.
£ +100 key
Use to select the disc number with the
multi-CD player.
TV Mute key
Use to temporarily mute the TV sound.
¢ Page 5/∞ keys
Use to operate the DVD component.
RDS Disp. key ª
Use to receive RDS broadcast.
PTY key º
Use for PTY search.
∞ OSD (on screen display) key
Use to operate the DVD component.
Guide key
Use to operate other components.
§ Menu key
Use to operate other components.
¶ Mute key ¢
Use to temporarily mute the sound.
• Tone key ¢
Use to switch the status of TONE control.
Sound key fl
Use to adjust the sound quality and the
ambience effects.
ª VOL +/– keys £
Use to adjust the receiver’s volume.
º Bass Boost key ¢
Use to select the maximum adjustment
setting for the low frequency range.
⁄ ÷ key
If MD or Tape is selected, this key
functions as record key.
If VCR is selected, this key functions as
record key when it pressed twice
sequentially.
Top Menu key
Use to operate the DVD component.
Setup key (
Use to select the speakers’ settings etc.
¤ Loudness key ¢
Use to switch the status of LOUDNESS.
‹ Speaker EQ key ¢
Use to select SPEAKER EQ’s setting.
› 7 key
If CD, MD, or TAPE is selected as the
input source, this key functions as the
stop key.
Auto key ¶
Use to select the auto or manual tuning
mode.
fi Learn key
Use to register other components.·
Use to memorize the operation of the
other remote controls. q
fl Input Mode key 8
Use to switch between the full auto,
digital and analog inputs.
1 Source keys (MD/TAPE, CD/DVD, DVD/
6CH,
TUNER,
VID1, VID2, VID3, AV AUX
,
PHONO) ·
When press and hold for more than 3
seconds, they are used to select the
registered components.
Input Selector keys (MD/TAPE, CD/DVD, DVD/
6CH, TUNER, VID1, VID2, VID3, AV AUX,
PHONO)
£
When press and release in less than 3 seconds,
they are used to select the input sources.
2 SRC (
source
) Power key
Use to turn the other source components on
or off.
3 Numeric keys ·
Provide functions identical to those of the
original remote control supplied with the
component you are controlling.
Multi (multi control) %/fi keys (
Use to control a variety of settings.
Use to operate other components.
P.Call @/# keys •
Use for selection adjustments during sound,
set up and preset channel functions.
Enter key
Use to operate other components.
4 Return key
Use to operate the DVD component.
Exit key
Use to operate other components.
S
R
C
P
o
w
e
r
T
V
P
o
w
e
r
5
6
8
9
4
3
2
1
0
7
Tune – Tune +
Dimmer
Band
Setup
Top MenuAuto
Info
/
Flip
Input
Mode
Loudness
Active
EQ
Speaker
EQ
Sound
Tone
TV Input
Bass
Boost
TV
VOL
4
¢
CH
+
–
VOL
+
–
Disc Skip
Menu
Input Sel.
OSD
Guide
Return
Exit
Page
TV Mute
Last
/
A/B
+ 10
+ 100
Multi
Multi
P. Call
P. Call
Enter
TV
PHONO
POWER
RCVR
VID2
VID1
DVD
6CH
CD
DVD
MD
TAPE
+–
TUNER
AV AUX
VID3
Stereo
Listen Mode
THX
Lea
r
n
Mute
1
2
3
#
$
@
¡
¶
4
5
7
8
)
™
£
§
6
0
%
⁄
¤
∞
•
‹
&
9
fi
º
fl
(
!
¢
ª
Disc Sel.
DSP
Mode
*
^
›
RDS Disp.
PTY
04.6.16, 3:49 PM7