Kenwood KRF-X9080D Stereo System User Manual


 
35
EN
ENGLISH
Ambience effects
THX functions when the display segment is turned ON.
THX Sur EX ON and THX Sur EX AUTO will not be available if
surround back speakers are turned OFF.
The THX setting differs depending on the input selector.
When PL IIx MUSIC, PL IIx GAME, PL II MUSIC, PL II GAME,
NEO:6 MUSIC, ACTIVE EQ or SPEAKER EQ is ON, THX function
will not be effective.
5
Adjust the volume.
Switching the LISTEN mode to STEREO temporarily
Pressing the STEREO key changes the currently selected LISTEN mode
into STEREO. It will be changed back to the original LISTEN mode by
pressing the STEREO key again.
If the power is turned off and turned back on, or the input selector is
switched to another and switched back, the LISTEN mode will be back
to the original one.
Notes
Depending on the type of the signal or speaker setting, some listening
modes cannot be selected.
When playback is started, the sound may be cut or interrupted before
the input source is confirmed as Dolby Digital.
To enjoy Dolby Digital surround (as well as all the other listening modes)
from a single component, be sure to use a Dolby Digital compatible
source component.
Dialogue Normalization (Dial Norm) is a feature of Dolby Digital. It is able
to automatically maintain the overall audio output level constant.
L
SL SR
CR
SP MUTE
OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
STEREO
LOUDNESS
NEO:6
CSII
AB CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
DOLBY DIGITAL
PRO LOGIC
LFE
When playing some Dolby Digital sources, you may see in the display
a message "DIALNORM OFFSET xxdB". This is because some
soundtracks may be recorded either louder or quieter than normal. The
xx number shows by how much.
For example, if the message says “DIALNORM OFFSET +4dB” you
know that this particular recording was encoded 4dB louder than
normal. If you wish, you can turn down the volume control by 4dB to
keep the playback level consistent.
When the analog signal or the digital signal (except for
DOLBY DIGITAL or DTS signal) is input :
1 PLIIx MOVIE : PRO LOGIC IIx surround MOVIE mode.
(PRO LOGIC indicator lights up.)
2 PLIIx MUSIC : PRO LOGIC IIx surround MUSIC mode.
(PRO LOGIC indicator lights up.)
3 PLIIx GAME : PRO LOGIC IIx surround GAME mode.
(PRO LOGIC indicator lights up.)
4 PLII MOVIE : PRO LOGIC II surround MOVIE mode.
(PRO LOGIC indicator lights up.)
5 PLII MUSIC : PRO LOGIC II surround MUSIC mode.
(PRO LOGIC indicator lights up.)
6 PLII GAME : PRO LOGIC II surround GAME mode.
(PRO LOGIC indicator lights up.)
7 PRO LOGIC : PRO LOGIC II surround PRO LOGIC mode.
(PRO LOGIC indicator lights up.)
8 NEO:6 CINEMA : NEO:6 surround CINEMA mode.
(NEO:6 indicator lights up.)
9 NEO:6 MUSIC : NEO:6 surround MUSIC mode.
(NEO:6 indicator lights up.)
0 STEREO :
Normal stereo playback.
(STEREO indicator lights up.)
• Dolby Digital or DTS signal having more channels than the maximum
number of playback channels available using this model’s current
settings is input, downmixing is performed to match the number of
available channels.
3
DSP mode (Digital Signal Processor).
DSP can produce these effects without spoiling the sound quality of
the original music or video source.
This mode can be selected when digital signals other than DOLBY
DIGITAL or DTS, or analog signal come in.
1 Pressing the DSP key or DSP Mode key will display the
current DSP MODE status.
2 Each press of the key will switch to the next status as shown
bellow:
1 ARENA : DSP surround ARENA mode.
2 JAZZ CLUB : DSP surround JAZZ CLUB mode.
3 THEATER : DSP surround THEATER mode.
4 STADIUM : DSP surround STADIUM mode.
5 DISCO : DSP surround DISCO mode.
The DSP mode selection is displayed for approximately 3 seconds.
4
THX mode.
This mode creates a home theater environment which is able to
reproduce a cinema surround sound system featuring improved
special representation and acoustic imaging of surround channels by
translating THX Surround EX technology.
Press the THX key to switch the following setting :
1 THX Sur EX AUTO : THX Surround EX function is turned ON
when Dolby Digital Surround EX signal is
detected.
(THX indicator lights up.)
2 THX Sur EX ON : THX Surround EX function is turned ON
when Dolby Digital 5.1ch signal is
detected.
(THX indicator lights up.)
3 THX ON : THX mode is turned ON.
(THX indicator lights up.)
4 THX OFF :
THX mode is turned OFF.
(THX indicator goes off.)
04.6.16, 1:37 PM35