Kenwood KRF-X9080D Stereo System User Manual


 
38
EN
ENGLISH
Ambience effects
Dual Mono mode (Dolby Digital mode only)
When the Dolby Digital source have Multiplex sound, you can select
Main / Sub sound for Audio output.
1 Press the SOUND key, then press the
/
keys or @/# keys until
DUAL MONO” appears on the display.
This can be selected only if CD/DVD, DVD/6CH, VIDEO 2 or VIDEO
3 is selected as the source, and the input signal is set to “Dolby
Digital”.
2 Use the MULTI CONTROL knob or Multi (%/) keys for the
following selection.
1 Main : Multiplex Main channel output.
2 Sub : Multiplex Sub channel output.
3 Main + Sub : Multiplex Main + Sub channel output.
4 Stereo : Main channel from the left speaker. / Sub
channel from the right speaker.
LFE
OPTICAL 6CH INPUT
The adjustment item is displayed for approximately 20 seconds.
Display dimmer adjustment
The dimmer function lets you select the brightness of the receiver's
display. You might find this useful if you darken your room to watch
movies or listen to music.
Each time you press the DIMMER key, the display brightness
changes among the three available settings.
Select the brightness level you find most pleasing.
LR
SP MUTE
OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
LOUDNESS
NEO:6
CSII
AB CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
LFE
LR
SP
A
LR
SP
STEREO
A
DOLBY DIGITAL
PRO LOGIC
DOLBY DIGITAL
PRO LOGIC
96kHz LPCM playback
The receiver is compatible with the 96kHz LPCM playback. To play a
96kHz DVD, set the listen mode other than DSP mode.
In FULL AUTO input mode and the listen mode is set to DSP mode, the
listen mode will automatically be STEREO.
When in DIGITAL MANUAL input mode and the listen mode is set to
DSP mode, “96kHz LPCM” will appear in the display and no sound can
be heard from the speakers.
Use the LISTEN MODE knob or STEREO key to select STEREO mode
to output sound from the speakers.
04.6.16, 1:38 PM38